Wakefield · England
Bath re-enamelling & resurfacing in Ackworth Moor Top, Wakefield
Bath re-enamelling in Ackworth Moor Top without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that will not shift
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
Bath re-enamelling in Ackworth Moor Top without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Typical jobs include several chips and rust patches and thin, worn enamel in places, in Victorian roll-tops, pressed steel baths and basins & shower trays.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Ackworth Moor Top (WF7)
- County
- Wakefield
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Ackworth Moor Top
Also in Ackworth Moor Top
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Where we work around Ackworth Moor Top
Ackworth Moor Top is about 4 miles south-west of Pontefract, in Wakefield. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Ackworth Moor Top is one of 101 places in Wakefield we cover. You can also see our page for Leeds, about 14 miles away.
All of WF7 is covered. Whether you live on Moor Top Avenue, Tarn Hows Walk and Penrose Beck Drive or anywhere nearby, we can come to you. Neighbouring places we cover include Brackenhill (1 mile west), Hessle (1 mile north), Low Ackworth (1 mile north-east), High Ackworth (1 mile north-east) and Fitzwilliam (1 mile south-west). We also work in nearby towns such as Wakefield (7 miles north-west), Castleford (5 miles north), Pontefract (4 miles north-east), Ossett (10 miles west), Normanton (5 miles north-west) and South Kirkby and Moorthorpe (4 miles south-east).
What’s near Ackworth Moor Top
We visit homes around Outwood Primary Academy Bell Lane, All Saints and Outwood Academy Hemsworth. The closest station to Ackworth Moor Top is Fitzwilliam station, roughly 1.4 miles south-west. Nearby you will also find Pontefract Castle (4 miles north-east) and Pontefract Hospital (3.6 miles north-east). The countryside around Ackworth Moor Top includes Waterton Park.
FAQs for Ackworth Moor Top
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
What happens after I send photos?
We review the photos and send a fixed quote and the next dates we have.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What areas do you cover?
We cover the entire UK, including Ackworth Moor Top and the rest of Wakefield. Just include your postcode and we will confirm dates.
Can you do the outside of a roll-top?
Yes. Inside and out.
When to call us in Ackworth Moor Top
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Keep an eye out for any of the following:
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
What your quote should include
- What happens if the damage is worse than the pictures show
- How long the guarantee is and what it covers
- How to care for the finish
- How your room will be protected
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- A fixed quote before you book
- One price list for the entire UK
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
Read our prices page and resurfacing vs replacement cost guide.
Landlord and trade work in Ackworth Moor Top
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us photos and we’ll tell you honestly.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Keeping it looking good
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Have chips seen to early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
