Na h-Eileanan Siar · Scotland
Bath Re-enamelling in Ardheisker
Full bath re-enamelling and resurfacing in Ardheisker, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that will not shift
- An outdated colour you’d like to change
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Bath re-enamelling in Ardheisker without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a coloured bath you want in white and a bath that stays dull however much you clean it, we can normally put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Ardheisker (HS6)
- Area hub
- Na h-Eileanan Siar
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Na h-Eileanan Siar and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Common problems we fix in Ardheisker
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Look out for any of the following:
- A coating lifting around the plughole
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
What your quote should include
- When it can be used again
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Whether the colour is mixed to match
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a full day for most jobs. We leave the room clean and ready to use once it has cured.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
How to prepare
- Clear the area around the damage
- Keep a parking space free if you can
- Let us know if it has been repaired before
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Advice
Ardheisker and nearby
Ardheisker is in Na h-Eileanan Siar. Across the HS6 area, we carry out the work at your property. Our technicians cover all 87 towns and villages across Na h-Eileanan Siar.
Our visits in HS6 are booked in the same way as anywhere else. Nearby, we also work in Claddach Kyles (1 mile east), Claddach Kirkibost (1 mile south-east), Locheport (5 miles south-east), Baile a' Mhanaich (7 miles south) and Balivanich (8 miles south). If you are somewhere remote, call first so we can plan the visit.
Local landmarks in Ardheisker
We visit homes around North Uist, among other places. The countryside around Ardheisker includes Loch Grogary and Balranald RSPB reserve.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The material
- Unusual colours or finishes
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
Phone pictures are fine. Just make sure we can see:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- Your postcode, so we can check dates
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Nearby places to Ardheisker
What else we do in Ardheisker
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
FAQs for Ardheisker
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we’ll plan for it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Na h-Eileanan Siar.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your pictures and we will quote them together.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
