Swindon · England
Bath re-enamelling & resurfacing in Ashbury, Swindon
Bath re-enamelling for Ashbury, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that is failing
Common problems we fix in Ashbury
Many baths we resurface have simply been well used. The body of the bath is generally perfectly sound.
The most common problems we are called about are:
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- A roll-top that’s seen better days
What your quote should include
- What happens if the damage is worse than the photos show
- What preparation is included
- How your room will be protected
- What aftercare is recommended
Bath re-enamelling in Ashbury, done in place
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s thin, worn enamel in places and a peeling or bubbling previous coating, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Ashbury (SN6)
- Region
- Swindon
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Don’t let dyes or oils sit on the finish
- Avoid suction-cup mats
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
For landlords and businesses
Landlords, letting agents and housing providers in Ashbury use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for most of the day. Before we go, we’ll explain how long to leave it and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
Ask for a price
For a price in Ashbury, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Places near Ashbury
Other services in Ashbury
How we price bath re-enamelling
Prices start from £350. You will know the full cost before booking. We take into account:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Doing more than one item at once
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
About Ashbury
Ashbury is about 6 miles east of Stratton St Margaret, in Swindon. Anywhere in SN6, we come to you. Our repair technicians cover all 68 towns and villages across Swindon. Our nearest city page is Birmingham, about 64 miles away.
Our technicians cover all of the SN6 postcode area. Jobs here include addresses on High Street, Chapel Road and Berrycroft and the roads around them. Neighbouring places we cover include Kingstone Winslow (1 mile north), Idstone (1 mile south-west), Bishopstone (1 mile south-west), Bourton (2 miles north-west) and Hinton Parva (3 miles south-west). We also work in nearby towns such as Swindon (7 miles west), Stratton St Margaret (6 miles west), Royal Wootton Bassett (12 miles west), Haydon Wick (8 miles west), Priory Vale (8 miles west) and Freshbrook (9 miles west).
Around Ashbury
Typical jobs here are in homes near Church of St Mary and Rose and Crown Hotel, among other places. A little further out are Great Western Hospital (5.9 miles west) and Uffington Museum (3.5 miles north-east). For a walk, there is Dragon Hill and Seven Barrows.
FAQs for Ashbury
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do the materials smell?
Expect a mild smell while we’re working.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
What we cannot put right
It helps to know what we can’t do:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
