Derbyshire · England
Bath re-enamelling & resurfacing in Ashgate, Derbyshire
Bath re-enamelling for Ashgate, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
Bath re-enamelling in Ashgate without replacing anything
We do not move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. Whether it’s a period or roll-top bath worth keeping and a coloured bath you want in white, we can help, on pressed steel baths, basins & shower trays and Victorian roll-tops alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Ashgate (S40, S42)
- County
- Derbyshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take the best part of a day, including clearing up.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Let us know about parking or access
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Read more
FAQs for Ashgate
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens after I send pictures?
We review the photos and send a fixed quote.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you come to Ashgate?
Yes. We cover the whole UK and travel to Ashgate. Send us photos for a fixed quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Places near Ashgate
What else we do in Ashgate
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Our work in Ashgate
Ashgate is about 1 mile south-west of Chesterfield, in Derbyshire. We travel to clients in Ashgate, so nothing has to leave your home. We work in all 532 towns and villages in Derbyshire, from the larger towns to small villages. You can also see our page for Manchester, about 36 miles away.
Here we cover the S40 and S42 postcode area. Local streets include Old Road, Manor Road and Storrs Road, and we cover them all. If you’re just outside Ashgate, we cover Brampton (1 mile north-west), Walton (1 mile south), Boythorpe (1 mile east), Chesterfield (1 mile north-east) and Birdholme (2 miles south-east). Within a short drive, we also cover Belper (14 miles south), Dronfield (5 miles north), Ripley (13 miles south), Bolsover (7 miles east), Staveley (5 miles north-east) and Langley Mill (15 miles south).
What’s near Ashgate
Typical jobs here are in homes near Brookfield Community School, The Star pub and St Thomas' Church, among other places. The closest station to Ashgate is Chesterfield station, roughly 1.7 miles east. Other landmarks nearby include Municipal Borough of Chesterfield (1.8 miles east) and Walton Hospital (0.9 miles south-east). Not far away are Beeley Moor.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- How much damage there is
- What kind of damage it is
- How hard the colour is to match
- Previous DIY repairs that have to come out
Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any details about the material
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
What we cannot put right
To be straight with you, some problems need a different fix:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Send us pictures and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Why choose Surface Doctor in Ashgate
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- Nothing taken out or refitted
Read our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
