Scottish Borders · Scotland
Bath Re-enamelling in Ashkirk
Our technicians come to Ashkirk for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Several chips and rust patches
What affects the price in Ashkirk
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The colour and finish to match
- Where the damage is and how we get to it
- Whether we combine several jobs
- How much damage there is
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
If you’re in Ashkirk and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
How we handle bath re-enamelling in Ashkirk
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include a roll-top that’s seen better days and staining under the taps and around the waste, across Victorian roll-tops, pressed steel baths and basins & shower trays.
You get a one-year guarantee, the same in Ashkirk as everywhere else we work.
- Where
- Ashkirk (TD7)
- Area hub
- Scottish Borders
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common problems we fix in Ashkirk
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The things customers typically mention when they call include:
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Comparing quotes
- What aftercare is recommended
- How your room will be protected
- When it can be used again
- How changes to the job are handled
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Ashkirk
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- CHAS and Constructionline accredited
Read our pricing and resurfacing vs replacement cost guide.
Ashkirk questions
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Are there extra charges for Ashkirk?
There’s no separate call-out charge. Your fixed quote includes everything.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
What else we do in Ashkirk
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Ask for a price
Most customers in Ashkirk get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Ashkirk and nearby
Ashkirk is about 5 miles north-west of Hawick, in the Scottish Borders. From the centre of Ashkirk to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 89 towns and villages in the Scottish Borders. We work right across the region, from Ashkirk to Edinburgh (about 34 miles away).
Our visits in TD7 work the same way as everywhere else we cover. You’ll find streets such as Crans Field Drive and The Glebe, all of which we cover. Neighbouring places we cover include Woll (1 mile south-west), Selkirk (4 miles north), Lilliesleaf (4 miles north-east), Stirches (4 miles south-east) and Midlem (5 miles north-east). Larger places within reach include Galashiels (8 miles north), Hawick (5 miles south-east), Jedburgh (11 miles east), Wilton (5 miles south), Innerleithen (12 miles north-west) and Melrose (9 miles north-east).
Near you in Ashkirk
Typical jobs here are in homes near Ashkirk Parish Church, among other places. Further afield, we also cover the area around Halliwells House Museum (3.7 miles north) and Hawick Community Hospital (5.1 miles south). Open spaces near Ashkirk include Headshaw Loch and Ashkirk Hill.
About our accreditations · Every repair comes with a one-year guarantee.
