Norfolk · England
Bath re-enamelling & resurfacing in Attleborough, Norfolk
Bath re-enamelling across Attleborough and nearby, generally in one visit.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Bath re-enamelling in Attleborough, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair pressed steel baths, acrylic baths and Victorian roll-tops, and common reasons people get in touch are staining under the taps and around the waste and an outdated colour you’d like to change.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Attleborough (NR17)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Places near Attleborough
Other services in Attleborough
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- The material and finish
- The type of damage
- How many items we do on one visit
- How easy the damage is to reach
We charge the same wherever you are, with no extra for Attleborough. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- Where you are, by postcode
- The material, if you know it
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Keeping it looking good
How the surface is treated afterwards matters:
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Store bottles off the bath
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Repairing versus replacing in Attleborough
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
- A year’s guarantee on all work
- No extra charge for your area
See our pricing and resurfacing vs replacement cost guide.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Where we work around Attleborough
Attleborough is about 15 miles south-west of Norwich, in Norfolk. Anywhere in NR17, we come to you. We work in all 797 towns and villages in Norfolk.
Our visits in NR17 are booked in the same way as anywhere else. We regularly work on streets such as Millers Square, High Street and London Road. With the B1077 close by, Attleborough is simple for us to get to. If you’re just outside Attleborough, we cover Fiddlers' Green (1 mile north), Besthorpe (1 mile north-east), Morley St Peter (2 miles north-east), Deopham Green (3 miles north) and Morley St Botolph (3 miles north-east). We also work in nearby towns such as Norwich (15 miles north-east), Thetford (13 miles south-west), Dereham (12 miles north), Wymondham (6 miles north-east), Watton (8 miles north-west) and Norwich Lanes (14 miles north-east). Being one of Norfolk’s larger places, Attleborough is somewhere we visit often.
Local landmarks in Attleborough
Around Attleborough, we work in homes near Attleborough Academy Norfolk, Griffin Hotel and Church of St Mary, among other places. The nearest railway station is Attleborough station, roughly 0.6 miles east. A little further out are Old Buckenham Castle (2.3 miles south-east) and Bickley Day Hospital (0.5 miles north-east).
When to call us in Attleborough
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
What to look for in a quote
- How the colour is matched
- What protection goes down before work starts
- What aftercare is recommended
- How soon you can use it again
Attleborough questions
Are there extra charges for Attleborough?
No. Our quotes include travel, and we charge the same wherever you are.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How do I get a price for bath re-enamelling in Attleborough?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
About our accreditations · Every repair comes with a one-year guarantee.
