Derbyshire · England
Bath re-enamelling & resurfacing in Beighton Fields, Derbyshire
Our repair technicians come to Beighton Fields for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Bath re-enamelling in Beighton Fields, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on basins & shower trays, cast iron baths and acrylic baths, and common reasons people get in touch are a coloured bath you want in white and a roll-top that’s seen better days.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Beighton Fields (S21, S43)
- County
- Derbyshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Beighton Fields
More services for Beighton Fields
Common problems we fix in Beighton Fields
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
Contact us if you’ve noticed any of these:
- Chips and rust in more than one place
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Questions to ask before booking
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
- Who will actually do the work
- What happens if the damage is worse than the photos show
How the visit works
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. You can expect it to take most of the day, and we will keep you posted as we go.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Open a window if you can
- Mention if the room is upstairs or in a flat
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Our work in Beighton Fields
Beighton Fields is about 2 miles south of Killamarsh, in Derbyshire. Our repair technicians come to customers in Beighton Fields and nearby villages, so nothing has to leave your home. We work in all 532 towns and villages in Derbyshire, from the larger towns to small villages. Our jobs stretch from Beighton Fields to Leeds (37 miles away).
Our technicians cover all of the S21 and S43 postcode area. If you are just outside Beighton Fields, we cover Renishaw (1 mile north-west), Mastin Moor (1 mile south), Woodthorpe (1 mile south), Netherthorpe (2 miles south-west) and Poolsbrook (2 miles south). Further out, we also cover Chesterfield (6 miles south-west), Dronfield (6 miles west), Bolsover (4 miles south), Matlock (14 miles south-west), Clay Cross (9 miles south-west) and South Normanton (13 miles south).
Near you in Beighton Fields
Our clients here include homes close to Mount St Mary's College, Renishaw Primary School and St Matthew. The closest station to Beighton Fields is Kiveton Bridge station, roughly 4.3 miles north-east. Further afield, we also cover the area around Bolsover Castle (4 miles south) and Bolsover Hospital (4.2 miles south-east).
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Landlords, agents and businesses in Beighton Fields
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the next day. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- Work done at your home or business
- One-year guarantee on every repair
See our full price list and resurfacing vs replacement cost guide.
Beighton Fields: your questions answered
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Do you cover the whole of Derbyshire?
Everywhere in the UK, Beighton Fields included. There is no extra charge for travel.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Aftercare tips
So the finish stays in good condition:
- Have chips seen to early
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
