Isle of Anglesey · Wales
Bath re-enamelling & resurfacing in Benllech, Isle of Anglesey
Damaged bath in Benllech? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
About our bath re-enamelling in Benllech
The bath stays where it is, so the taps, tiles and plumbing are not touched. It generally takes one visit, and can be used again the day after. We work on cast iron baths, basins & shower trays and pressed steel baths, and the jobs we see most are a coating lifting around the plughole and lots of chips and rust spots.
All our work is covered by a one-year guarantee.
- Where
- Benllech (LL74)
- Region
- Isle of Anglesey
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Benllech
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Which areas do you work in?
We cover the entire UK, including Benllech and the rest of Isle of Anglesey. Send your postcode with your photos and we’ll offer you dates.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Benllech and nearby
Benllech is about 8 miles north-west of Bangor, in Isle of Anglesey. Our technicians come to customers in Benllech, so you do not need to take anything anywhere. We cover 115 places in Isle of Anglesey, from the larger towns to small villages. You can also see our page for Liverpool, about 54 miles away.
Jobs in LL74 are booked in the same way as anywhere else. From Dolafon, Bangor Road and Lon Aber or a nearby road, a technician can come to you. We also cover the places around Benllech: Bwlch (1 mile south-west), Tyn-y-gongl (1 mile west), Traeth Coch (1 mile south), Llanbedrgoch (1 mile south) and Brynteg (1 mile west). Further out, we also cover Llangefni (6 miles south-west), Menai Bridge (6 miles south), Porthaethwy (7 miles south), Amlwch (8 miles north-west), Llanfair Pwllgwyngyll (7 miles south) and Beaumaris (7 miles south-east).
Near you in Benllech
In Benllech, that means homes near Plas Glanrafon pub, Capel Benllech and Ysgol Gynradd Llanbedrgoch and the streets around them. Well-known places in the area include Moelfre RNLI Seawatch Centre (2.5 miles north) and Cefni Hospital (5.3 miles south-west). For a walk, there is Llyn Cadarn and Moel Castell Mawr.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Nearby places to Benllech
Other services in Benllech
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- A bath that is rusted through
Send us photos and we’ll tell you honestly.
Materials we work on in Benllech
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Do you need bath re-enamelling in Benllech?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
People normally call us when they notice one of these:
- Chips and rust in more than one place
- A coloured bath you want in white
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
Before booking anyone
- What preparation is included
- How the room is protected while they work
- Whether the price covers travel
- Who will actually do the work
Repairing versus replacing in Benllech
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
What you get with us
- Rooms protected and left tidy
- Nothing taken out or refitted
- One price list for the whole UK
- CHAS and Constructionline accredited
See our pricing or guide to resurfacing and replacement costs.
What affects the price in Benllech
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- How much damage there is
- Previous DIY repairs that have to come out
- How many items we do on one visit
- What the surface is made of
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- A photo taken from further back
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Related advice
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Keep suction mats out of the bath
- Don’t leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Store bottles off the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
