Gateshead · England
Bath re-enamelling & resurfacing in Bill Quay, Gateshead
Damaged bath in Bill Quay? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Where we work around Bill Quay
Bill Quay is about 1 mile south-west of Hebburn, in Gateshead. Our repair technicians come to homes and businesses in Bill Quay, so you do not need to take anything anywhere. We work in 49 places across Gateshead, from the larger towns to small villages.
Jobs in NE10, NE31 and NE6 are booked in the same way as anywhere else. You will find streets such as Shields Road, Station Road and Jonadab Road, and we cover them all. Bill Quay is on the A185, which makes it straightforward to reach. Neighbouring places we cover include Pelaw (1 mile south-west), Heworth (1 mile south-west), Felling (1 mile south-west), Leam Lane Estate (1 mile south) and Low Walker (1 mile north). Within a short drive, we also cover Blaydon (7 miles west), Dunston (4 miles west), Whickham (6 miles west), Ryton (9 miles west), Winlaton (7 miles west) and Crawcrook (10 miles west).
Around Bill Quay
We visit homes around Church of St Mary, Carr-Ellison Park and St Joseph's Catholic Academy. You will also find Bill Quay Primary School (less than half a mile east) and St Joseph's Catholic Academy (0.6 miles east). The nearest railway station is Heworth station, about 0.9 miles south-west. Further afield, we also cover the area around Newcastle upon Tyne Castle (3 miles west) and Municipal Borough of Wallsend (2.3 miles north). Open spaces near Bill Quay include WWT Washington.
Bath re-enamelling in Bill Quay without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include wear marks under the taps and a dull, rough surface that won’t come clean, across Victorian roll-tops, cast iron baths and pressed steel baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Bill Quay (NE10, NE31, NE6)
- Area hub
- Gateshead
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What happens on the day
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It usually takes the best part of a day, and you’re welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Do you need bath re-enamelling in Bill Quay?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Most people contact us when they notice something like this:
- A coating lifting around the plughole
- Chips and rust in more than one place
- Wear marks under the taps
- A dull, rough surface that won’t come clean
Before booking anyone
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- Who turns up on the day
- Whether the price is fixed and includes VAT
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Also near Bill Quay
Also in Bill Quay
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface without moving it. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why us?
- CHAS and Constructionline accredited
- Repair technicians who travel to you, UK-wide
- Same prices wherever you are
- Nothing taken out or refitted
See our full price list or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Bill Quay. The price reflects:
- The material
- How many areas need work
- Unusual colours or finishes
- Previous DIY repairs that have to come out
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Daylight if possible, and no flash reflection
- Any details about the material
- Something in shot to show the size
- A close-up of the damage, in focus
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
- Leave the bath for the full curing time before using it
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Your questions about bath re-enamelling in Bill Quay
Can I get a quote without a visit?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and you will get one combined price.
How long does re-enamelling take?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
About our accreditations · Every repair comes with a one-year guarantee.
