Devon · England

Bath re-enamelling & resurfacing in Black Dog, Devon

Our repair technicians come to Black Dog for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Black Dog

About our bath re-enamelling in Black Dog

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a bath that stays dull however much you clean it and a bath in a colour that no longer suits, in pressed steel baths, basins & shower trays and cast iron baths.

Big or small, it’s backed by a one-year guarantee in Black Dog and across Devon.

Area
Black Dog (EX17)
County
Devon
Guarantee
A year, on every repair
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Prices and what affects them

Prices start from £350. Every quote is fixed and free. What we look at:

  • Access to the area
  • Whether old repairs or coatings need taking off
  • How many areas need work
  • The material and finish

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Send photos for a quote

Photographing the damage takes a minute. Please include:

  • One sharp close-up of the damage
  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • Any earlier repairs or coatings

Send us a picture of the damage and a wider shot of the whole item, with your EX17 postcode, and we’ll reply with a fixed quote.

What we do, step by step

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow a full day, and we’ll tell you if anything changes.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Keep a parking space free if you can
  • Mention any parking restrictions or tricky access

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Send pictures for a quote

Read more

Landlord and trade work in Black Dog

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Clean with a soft cloth and mild detergent
  • Store bottles off the bath
  • Have chips seen to early
  • Do not use the bath until it has fully cured

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

Common problems we fix in Black Dog

Hard water speeds up the wear, and abrasive cleaners do the most damage.

It’s worth getting a quote if you see:

  • An old resurfacing that is failing
  • A dull, rough surface that won’t come clean
  • Several chips and rust patches
  • Stains that will not shift

What to look for in a quote

  • How changes to the job are handled
  • What preparation is included
  • Whether a trained technician does the job
  • How long the guarantee is and what it covers

10 questions to ask before booking

Black Dog and the surrounding area

Black Dog is about 6 miles north of Crediton, in Devon. From the centre of Black Dog to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Black Dog is one of 586 places in Devon we cover.

All of EX17 is covered. We also travel to Poughill (3 miles east), East Village (4 miles south-east), Cheriton Fitzpaine (5 miles south-east), Sandford (5 miles south) and Chilton (5 miles south-east). Further out, we also cover Exeter (13 miles south-east), Tiverton (10 miles east), St Thomas (13 miles south-east), Larkbeare (13 miles south-east), Polsloe (13 miles south-east) and Cullompton (13 miles east).

What’s near Black Dog

Locally, our jobs take us to homes close to Black Dog Inn. The nearest railway station is Morchard Road station, roughly 4.5 miles south-west of the centre. Well-known places in the area include Crediton Hospital (5.8 miles south) and Down Castle (2 miles east).

Map of Black Dog © OpenStreetMap contributors

Why repair rather than replace?

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.

What you get with us

  • Nothing taken out or refitted
  • We will tell you if it’s not worth repairing
  • Work done at your home or business
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our full price list or resurfacing vs replacement cost guide.

Repairs by material

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

FAQs for Black Dog

How long does re-enamelling take?

Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Can you resurface a pink bath in white?

Yes, most people go for white. Mention the colour you want when you send photos.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

How much does bath re-enamelling cost in Black Dog?

Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item with your EX17 postcode.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Which areas do you work in?

We cover the entire UK, including Black Dog and the rest of Devon. Send your postcode with your photos and we’ll confirm dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.