Scottish Borders · Scotland
Bath Re-enamelling in Blyth Bridge
Bath re-enamelling in and around Blyth Bridge: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that don’t clean off
When we would advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
How we handle bath re-enamelling in Blyth Bridge
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s lots of chips and rust spots and enamel that’s lost its shine and feels rough, we can help, on acrylic baths, Victorian roll-tops and cast iron baths alike.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Blyth Bridge (EH46)
- Area hub
- Scottish Borders
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Blyth Bridge
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
Questions to ask before booking
- If travel is included in the price
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
- How long it needs to cure
Blyth Bridge: your questions answered
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you cover Blyth Bridge?
Yes, we do. We send a technician to Blyth Bridge for every job, with no extra charge for travel.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
What affects the price in Blyth Bridge
Resurfacing from £350. There is no area surcharge for Blyth Bridge. The price reflects:
- The colour and finish to match
- Doing more than one item at once
- What the surface is made of
- How easy the damage is to reach
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Quotes from your photos
Two or three clear photos are typically enough. Try to include:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Something in shot to show the size
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you are under no obligation.
Where we work around Blyth Bridge
Blyth Bridge is about 11 miles south-west of Penicuik, in the Scottish Borders. Customers in Blyth Bridge get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Blyth Bridge is one of 89 places in the Scottish Borders we cover. Our nearest city page is Edinburgh, about 19 miles away.
Every address in EH46 is within our area, from the main roads to the quietest streets. Whether you live on Tarth Crescent and Mill Lade or anywhere nearby, we can come to you. Neighbouring places we cover include Kirkurd (1 mile south-west), Dolphinton (2 miles north-west), Romannobridge (3 miles north-east), West Linton (4 miles north) and Candy Mill (4 miles south-west).
Landmarks near Blyth Bridge
Typical jobs here are in homes near Kirkurd Parish Church And Churchyard. A little further out are Castle Craig Hospital (0.8 miles south) and Drochil Castle (2.2 miles south-east). Not far away are Whiteside Hill and Slipperfield Loch.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
Dry the bath after use if possible, and rinse off any bath products.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Landlords, agents and businesses in Blyth Bridge
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Also near Blyth Bridge
What else we do in Blyth Bridge
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why us?
- Colour-matched on site
- Most jobs done in one visit
- No need to remove anything
- We leave the room as we found it
Take a look at our full price list or resurfacing vs replacement cost guide.
What we do, step by step
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It usually takes the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Make sure the area is dry
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
Getting a price
To get a price, send a couple of pictures through our quote form or call us. We’ll say straight away whether it can be repaired.
Read more
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
