Barnsley · England
Bath re-enamelling & resurfacing in Bolton upon Dearne, Barnsley
Full bath re-enamelling and resurfacing in Bolton upon Dearne, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Bath re-enamelling in Bolton upon Dearne without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We’re often asked to fix an outdated colour you’d like to change and wear marks under the taps, across acrylic baths, pressed steel baths and basins & shower trays.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Bolton upon Dearne (S63)
- Region
- Barnsley
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Bolton upon Dearne
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do you work in Bolton upon Dearne?
Yes. We work across the UK and come to Bolton upon Dearne and the rest of Barnsley. Send us photos for a fixed quote, or call 0345 017 0787.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your S63 postcode.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Towns and villages near Bolton upon Dearne
Also in Bolton upon Dearne
Signs you need bath re-enamelling in Bolton upon Dearne
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Common reasons people in Bolton upon Dearne contact us are:
- Chips and rust in more than one place
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Questions to ask before you book
- Who turns up on the day
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
What we do, step by step
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Let the surface dry out before the visit
Getting a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Related advice
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- A bath that is rusted through
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The material and finish
- Access to the area
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
You can take the pictures on your phone. Ensure they show:
- Something in shot to show the size
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Any details about the material
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Our work in Bolton upon Dearne
Bolton upon Dearne is about 2 miles north-east of Wath upon Dearne, in Barnsley. Jobs in Bolton upon Dearne are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover 94 places across Barnsley, from the larger towns to small villages. Our jobs stretch from Bolton upon Dearne to Leeds (22 miles away).
All of S63 is within our area, from the main roads to the quietest streets. You will find streets such as St Andrew's Square, Station Road and Beechfield Close, and we cover them all. Being close to the B6098, Bolton upon Dearne is simple for us to get to. Nearby, we also work in Goldthorpe (1 mile north-east), Manvers (1 mile south-west), Billingley (2 miles north-west), Wath upon Dearne (2 miles south-west) and Thurnscoe (2 miles north). Further out, we also cover Barnsley (7 miles west), Wombwell (3 miles west), Shaw Lands (7 miles west), Hoyland (5 miles west), Worsbrough (6 miles west) and Wilthorpe (8 miles west).
Local landmarks in Bolton upon Dearne
Around Bolton upon Dearne, we work in homes near St Andrew's Church, Heather Garth Primary School Academy and Phoenix Park. Other local landmarks include The Dearne Academy (0.8 miles north-east) and Mexborough Academy (1.5 miles south-east). There’s a railway station in Bolton upon Dearne itself: Bolton-On-Dearne station. Well-known places in the area include Conisbrough Castle (4.5 miles south-east) and Dearne Urban District (1.3 miles north-east). Not far away are Denaby Ings.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Looking after it afterwards
So the finish stays in good condition:
- Repair dripping taps early
- Store bottles off the bath
- Wash away dyes and oils after use
- Have chips seen to early
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
