Denbighshire · Wales
Bath Re-enamelling in Bonwm
Problem with your bath in Bonwm? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
Bath re-enamelling in Bonwm, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s worn patches where water runs and sits and chips and rust in more than one place, we can help, on acrylic baths, Victorian roll-tops and basins & shower trays alike.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Bonwm (LL21)
- Area hub
- Denbighshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
About Bonwm
Bonwm is about 15 miles north-west of Oswestry, in Denbighshire. From the centre of Bonwm to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Bonwm is one of 81 towns and villages in Denbighshire where we work. Our nearest city page is Liverpool, about 34 miles away.
We work across LL21. Neighbouring places we cover include Llansanffraid Glyndyfrdwy (1 mile north-east), Carrog (1 mile east), Llidiart-y-Parc (1 mile east), Corwen (2 miles west) and Clawdd Poncen (2 miles west). Further out, we also cover Denbigh (15 miles north), Ruthin (9 miles north), Fron (15 miles north), Copenhagen (15 miles north), Llangollen (7 miles east) and Bryn Seion (15 miles north).
Near you in Bonwm
Our clients here include homes close to The Grouse pub and St Bridget's Church, among other places. Well-known places in the area include Corwen Castle (1.4 miles west) and Corwen Museum (1.4 miles west). Not far away are Pen Coed Mawr.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes most of the day in most cases. The room is left tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Landlord and trade work in Bonwm
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Bonwm use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- The material
- What kind of damage it is
- Access to the area
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
It only takes a minute to photograph the damage. Try to send:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- The material, if you know it
Send us a photo of the damage and a wider shot of the whole item, with your LL21 postcode, and we’ll reply with a fixed quote.
Bonwm questions
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
Take a look at our full price list and bath cost comparison.
Places near Bonwm
More services for Bonwm
About our accreditations · Every repair comes with a one-year guarantee.
