Norfolk · England
Bath Re-enamelling in Brandiston
Full bath re-enamelling and resurfacing at your home in Brandiston, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- Staining under the taps and around the waste
Brandiston and the surrounding area
Brandiston is about 5 miles north of Taverham, in Norfolk. Clients in Brandiston get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Brandiston is one of 797 places in Norfolk we cover.
Every address in NR10 is within our area. We also travel to The Grove (1 mile north-west), Cawston (1 mile north), Eastgate (1 mile north-east), Hengrave (1 mile south) and Booton (1 mile north-west). Within a short drive, we also cover Norwich (10 miles south-east), Dereham (10 miles south-west), Wymondham (12 miles south), Sprowston (10 miles south-east), Thorpe St Andrew (11 miles south-east) and North Walsham (11 miles north-east).
Landmarks near Brandiston
In Brandiston, that means homes near The Ratchatchers Inn, Reepham High School and College and St Nicholas' Church and the streets around them. For a walk, there’s Foxley Wood.
How we handle bath re-enamelling in Brandiston
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include a roll-top that’s seen better days and a coating lifting around the plughole, in Victorian roll-tops, acrylic baths and cast iron baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Brandiston (NR10)
- County
- Norfolk
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Brandiston
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
How to look after the repair
Nothing complicated is needed:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
How to get a price
To get a price, send a couple of photos using our quote form or call us. We’ll say straight away if a repair is the right fix.
Advice
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Brandiston questions
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you cover the entire of Norfolk?
Everywhere in the UK, Brandiston included. There’s no extra charge for travel.
Do you cover Brandiston?
Yes. We cover the entire UK and travel to Brandiston and the rest of Norfolk. Send pictures and we will quote, or call 0345 017 0787.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Repairing versus replacing in Brandiston
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- Fixed prices from your photos
- One visit for most repairs
- We come to you, anywhere in the UK
- Rooms protected and left tidy
Take a look at our prices page and guide to resurfacing and replacement costs.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Natural light rather than flash
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
