Shropshire · England

Bath re-enamelling & resurfacing in Bronington, Shropshire

Our technicians come to Bronington for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Bronington?

Bath re-enamelling at your home in Bronington

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with a bath in a colour that no longer suits and an old resurfacing that’s failing, we can generally put it right, whatever the material.

You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.

Area
Bronington (SY13)
Region
Shropshire
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Landlord and trade work in Bronington

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

How the visit works

We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Ensure the area is dry
  • Keep pets and children out of the room while we work

How to get a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a fixed price

Related advice

Common questions in Bronington

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Can you price it without visiting?

In nearly every case. If photos do not show enough, we’ll ask for another angle.

Can a failed resurfacing be redone?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

How much does bath re-enamelling cost in Bronington?

Prices start from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your SY13 postcode.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

How to look after the repair

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Leave the bath for the full curing time before using it
  • Get any chip repaired quickly
  • A quick wipe after use keeps limescale away
  • Never use suction bath mats

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • A bath split right through the body
  • Leaking taps or wastes (a plumber’s job)
  • Holes rusted through the metal

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Should you replace it?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • A year’s guarantee on all work
  • No extra charge for your area
  • We will tell you if it’s not worth repairing
  • A fixed quote before you book

See our full price list and resurfacing vs replacement cost guide.

Where we work around Bronington

Bronington is about 11 miles south-east of Wrexham, in Shropshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 433 places in Shropshire, from the larger towns to small villages. Our jobs stretch from Bronington to Liverpool (32 miles away).

Postcode districts we cover here: SY13. You will find streets such as School Lane, Bronington Park and Maesllwyn Close. If you are just outside Bronington, we cover Whitewell (1 mile north-east), Bettisfield (3 miles south-west), Hollinwood (3 miles south-east), Grindley Brook (3 miles north-east) and Brooklands (3 miles north-east). Larger places within reach include Oswestry (13 miles south-west), Market Drayton (12 miles east), Whitchurch (4 miles east), Wem (7 miles south), Ellesmere (6 miles south-west) and Sundorne (15 miles south).

Landmarks near Bronington

Typical jobs here are in homes near Church of the Holy Trinity and Bronington Voluntary Aided Primary School, among other places. The closest station to Bronington is Whitchurch (Shropshire) station, about 4.1 miles east. Well-known places in the area include Oswestry Town Museum (1.2 miles north-east) and Whitchurch Community Hospital (3.9 miles east). For a walk, there’s Prees Heath Common and Llyn Bedydd.

Map of Bronington © OpenStreetMap contributors

How we price bath re-enamelling

Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:

  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • How many areas need work

We charge the same wherever you are, with no extra for Bronington. The job itself decides the price: the material, the amount of damage and how many items.

Send photos for a quote

Photographing the damage takes a minute. Please include:

  • Something in shot to show the size
  • A picture taken from further back
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings

Email us pictures of the damage and a wider shot of the entire item, with your SY13 postcode, and we’ll reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.