Suffolk · England
Bath re-enamelling & resurfacing in Broome, Suffolk
Problem with your bath in Broome? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Several chips and rust patches

What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Bath re-enamelling at your home in Broome
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on basins & shower trays, cast iron baths and pressed steel baths, and the jobs we see most are lots of chips and rust spots and a coating lifting around the plughole.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Broome (NR35)
- Region
- Suffolk
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026

Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Do you need bath re-enamelling in Broome?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- A peeling or bubbling previous coating
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
What your quote should include
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- Whether they match the colour on site
- What happens if they find more damage
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- How many areas need work
- The material and finish
- Previous DIY repairs that have to come out
- Access to the area
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- What it’s made of, if you know
- Where you are, by postcode
Upload photos of the damage and a wider shot of the whole item, with your NR35 postcode, and we’ll come back with a fixed quote.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Where we work around Broome
Broome is about 11 miles west of Lowestoft, in Suffolk. From the centre of Broome to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Broome is one of 731 towns and villages in Suffolk we cover.
Every address in NR35 is within our area. Whether you live on Sun Road, Sunley Close and Loddon Road or a nearby road, we can come to you. Other places close to Broome include Ditchingham (1 mile west), Broome Street (1 mile north-east), Wainford (1 mile south), Mettingham (1 mile south-east) and Ellingham (1 mile north-east). Larger places within reach include Lowestoft (11 miles east), Beccles (5 miles east), Halesworth (9 miles south), Carlton Colville (10 miles east), Kirkley (12 miles east) and Pakefield (12 miles east).
Landmarks near Broome
Typical jobs here are in homes near Church of St Michael, The Artichoke pub and Broome Heath, among other places. Other local landmarks include Ditchingham Church of England Primary Academy (within half a mile west) and Bungay High School (1.9 miles south). For rail, the closest station is Beccles station, about 4.8 miles east of the centre. A little further out are Beccles and District War Memorial Hospital (4.6 miles east) and Bungay Castle (1.4 miles south-west).
- Other local spots include Wainford Rural District (3 miles south)
Landlord and trade work in Broome
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How to care for the repair
So the finish stays in good condition:
- Keep suction mats out of the bath
- Store bottles off the bath
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Questions from Broome
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What areas do you cover?
The whole UK, including all of Suffolk. Send your postcode with your pictures and we’ll offer you dates.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
Nearby places to Broome
More services for Broome
About our accreditations · Every repair comes with a one-year guarantee.

