Devon · England
Bath Re-enamelling in Buckland in the Moor
Full bath re-enamelling and resurfacing at your home in Buckland in the Moor, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
How we handle bath re-enamelling in Buckland in the Moor
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on acrylic baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about a roll-top that’s seen better days and thin, worn enamel in places.
Whatever the size of the job, you get the same one-year guarantee in Buckland in the Moor and across Devon.
- Where
- Buckland in the Moor (TQ13)
- County
- Devon
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- The colour and finish to match
We charge the same wherever you are, with no extra for Buckland in the Moor. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Two or three clear pictures are usually enough. It helps if you send:
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- The material, if you know it
- A coin beside the damage so we can judge size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
FAQs for Buckland in the Moor
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do you cover the entire of Devon?
Everywhere in the UK, Buckland in the Moor included. There is no extra charge for travel.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Nothing taken out or refitted
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
Take a look at our full price list or resurfacing vs replacement cost guide.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Buckland in the Moor and nearby
Buckland in the Moor is about 7 miles south-west of Bovey Tracey, in Devon. We travel to homes and businesses in Buckland in the Moor and nearby villages, so there is no workshop to go to. Buckland in the Moor is one of 586 places in Devon where we work.
We work across the TQ13 postcode area. If you’re just outside Buckland in the Moor, we cover Holne (3 miles south-west), Ashburton (3 miles south-east), Scorriton (3 miles south), Buckfast (4 miles south) and Ilsington (4 miles north-east). Within a short drive, we also cover Newton Abbot (9 miles east), Teignmouth (13 miles east), Tavistock (15 miles west), Kingsteignton (9 miles east), Ivybridge (12 miles south-west) and Dawlish (15 miles east).
Near you in Buckland in the Moor
Typical jobs here are in homes near Church of St Peter, among other places. Other landmarks nearby include Ashburton Museum (2.9 miles south-east) and Ashburton and Buckfastleigh Community Hospital (3 miles south-east). Green spaces nearby include Aish Tor.
How to look after the repair
It’s all simple stuff:
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Avoid suction-cup mats
- Do not leave a chip unrepaired
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Nearby places to Buckland in the Moor
More services for Buckland in the Moor
What happens on the day
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Open a window if you can
- Let us know which floor the room is on
Ask for a price
For a price in Buckland in the Moor, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
When to call us in Buckland in the Moor
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Common reasons people in Buckland in the Moor contact us are:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
- Wear marks under the taps
What to look for in a quote
- What happens if the damage is worse than the pictures show
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- What prep work is covered
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
