Norfolk · England
Bath re-enamelling & resurfacing in Burnham Overy Town, Norfolk
Problem with your bath in Burnham Overy Town? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Burnham Overy Town
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include a coating lifting around the plughole and enamel that’s lost its shine and feels rough, on cast iron baths, pressed steel baths and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in Burnham Overy Town and across Norfolk.
- Location
- Burnham Overy Town (PE31)
- Area hub
- Norfolk
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
What you get with us
- Technicians who travel to you, UK-wide
- A fixed quote before you book
- Everything repaired in place
- CHAS and Constructionline accredited
Take a look at our full price list or guide to resurfacing and replacement costs.
Also near Burnham Overy Town
More services for Burnham Overy Town
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Our work in Burnham Overy Town
Burnham Overy Town is about 19 miles north-east of King's Lynn, in Norfolk. Wherever you are in the PE31 postcode area, a technician comes to you. Our repair technicians cover all 797 towns and villages across Norfolk.
Jobs in PE31 are booked in the same way as anywhere else. Jobs here include addresses on Wells Road and Mill Road. Close by, we cover The Norfolk Burnhams (1 mile west), Burnham Overy (1 mile north-west), Burnham Overy Staithe (1 mile north), Burnham Market (1 mile south-west) and Burnham Thorpe (1 mile south-east). Further out, we also cover Fakenham (9 miles south-east), Hunstanton (11 miles west), Holt (15 miles east), Heacham (11 miles west), Wells-next-the-Sea (4 miles east) and Dersingham (13 miles south-west).
Local landmarks in Burnham Overy Town
In Burnham Overy Town, that means homes near Church of St Clement, Burnham Market Primary School and The Lord Nelson Public House. A little further out are Dalegate Market (2.8 miles west) and Bygones at Holkham Park (2.4 miles east). The countryside around Burnham Overy Town includes Holkham National Nature Reserve.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Get any chip repaired quickly
- Avoid suction-cup mats
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Your questions about bath re-enamelling in Burnham Overy Town
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
How the visit works
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the day after.
Before we arrive
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Related advice
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Do you need bath re-enamelling in Burnham Overy Town?
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Staining under the taps and around the waste
- Wear marks under the taps
- A coloured bath you want in white
- A period or roll-top bath worth keeping
Questions to ask before booking
- If travel is included in the price
- How the colour is matched
- Whether cleaning and preparation are in the price
- How your room will be protected
What affects the price in Burnham Overy Town
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
You can typically get a fixed price without us visiting. To make it quick:
- Natural light rather than flash
- Any details about the material
- Your postcode, so we can check dates
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
