Leeds · England
Bath Re-enamelling in Burton Salmon
Bath re-enamelling across Burton Salmon and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Stains that will not shift
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Burton Salmon
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are a dull, rough surface that won’t come clean and several chips and rust patches.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Burton Salmon (LS25)
- Area hub
- Leeds
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
It helps to know what we cannot do:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
When to call us in Burton Salmon
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Send us a picture if you notice any of these:
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
- A coating lifting around the plughole
- A roll-top that’s seen better days
What to look for in a quote
- If travel is included in the price
- When it can be used again
- Whether the price is fixed and includes VAT
- How changes to the job are handled
Questions from Burton Salmon
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Burton Salmon.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Also near Burton Salmon
Other services in Burton Salmon
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How much damage there is
- Whether we combine several jobs
- How hard the colour is to match
- The type of damage
We charge the same wherever you are, with no extra for Burton Salmon. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- The material, if you know it
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Repair or replace in Burton Salmon?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Why us?
- Rooms protected and left tidy
- A year’s guarantee on all work
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
Take a look at our pricing and guide to resurfacing and replacement costs.
Burton Salmon and the surrounding area
Burton Salmon is about 4 miles north-east of Pontefract, in Leeds. Whether you’re in the middle of Burton Salmon or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Burton Salmon is one of 198 places in Leeds where we work. You can also see our page for Leeds, about 13 miles away.
Every address in LS25 is covered. We regularly work on streets such as Main Street, Trust Fold and New Lane and the roads around them. We also travel to Brotherton (1 mile south-west), Fairburn (1 mile west), Byram (1 mile south), Sutton (1 mile south) and Hillam (1 mile north-east). We also work in nearby towns such as Leeds (13 miles west), Morley (14 miles west), Rothwell (9 miles west), Beeston (12 miles west), Wetherby (14 miles north) and Woodhouse (13 miles west).
Landmarks near Burton Salmon
Locally, our jobs take us to homes close to St James and Burton Salmon Community Primary School, among other places. The closest station to Burton Salmon is Knottingley station, roughly 2.3 miles south of the centre. A little further out are Pontefract Castle (3.6 miles south-west) and Pontefract Hospital (4 miles south-west). For a walk, there’s Fairburn Ings RSPB reserve.
For landlords and businesses
We work for landlords, letting agents and housing providers in Burton Salmon as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
For anyone letting property in or around Burton Salmon, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
What happens on the day
We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
