Hertfordshire · England
Bath Re-enamelling for Cholesbury homes
Local bath re-enamelling for Cholesbury: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
Common questions in Cholesbury
How much does bath re-enamelling cost in Cholesbury?
Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your HP23 postcode.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How we handle bath re-enamelling in Cholesbury
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair cast iron baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about enamel that’s lost its shine and feels rough and thin, worn enamel in places.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Where
- Cholesbury (HP23)
- County
- Hertfordshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
When a repair is not the answer
It helps to know what we cannot do too:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Also near Cholesbury
Other services in Cholesbury
How to care for the repair
Once the work has cured, treat it gently:
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a full day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
How to prepare
- Point us to the nearest place to park
- Clear the area around the damage
- Make sure the room can be ventilated
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
Read more
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Work for landlords and builders
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Do you need bath re-enamelling in Cholesbury?
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- An old resurfacing that’s failing
What your quote should include
- What the guarantee covers, and for how long
- Whether they match the colour on site
- Who will actually do the work
- Is the price fixed, and does it include VAT?
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Cholesbury. The price depends on:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- What kind of damage it is
- The material
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
You can normally get a fixed quote without us visiting. To help us price it:
- One picture of the entire bath
- Details of any past repairs
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Cholesbury and the surrounding area
Cholesbury is about 3 miles west of Berkhamsted, in Hertfordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 381 towns and villages across Hertfordshire. We work right across the region, from Cholesbury to London (about 30 miles away).
Postcode districts we cover here: HP23. From Cholesbury Lane and Cholesbury Road or anywhere nearby, we can come to you. We also travel to Buckland Common (1 mile west), Hawridge (1 mile east), St Leonards (1 mile west), Bellingdon (1 mile south-east) and Heath End (1 mile east). Further out, we also cover Watford (13 miles south-east), Hemel Hempstead (8 miles east), St Albans (14 miles east), Harpenden (14 miles east), Berkhamsted (3 miles east) and Bushey (15 miles south-east).
Around Cholesbury
Locally, our jobs take us to homes close to Full Moon Public House, Hawridge and Cholesbury Church of England School and Church of St Lawrence, among other places. The nearest railway station is Tring station, about 3.4 miles north of the centre. Nearby you’ll also find Trenchard Museum (3.3 miles north-west) and Chiltern Hospital (4.8 miles south). The countryside around Cholesbury includes Pavis Wood and Dancersend.
About our accreditations · Every repair comes with a one-year guarantee.
