Hertfordshire · England

Bath Re-enamelling in Chorleywood

Our technicians come to Chorleywood for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Chorleywood

Questions from Chorleywood

Do you work for landlords with property near Chorleywood station?

Yes, we often work between tenancies, and several addresses can be quoted together.

Can you restore the original baths in an older house in Chorleywood?

Generally: original pieces are frequently better made and harder to replace. Send photos and we will advise.

Will the new finish last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before.

How long will the bath be out of use?

Most baths are done in a day, ready the day after. We give you timings with the quote.

Do you charge for travel?

There is no separate call-out charge. The fixed quote covers the visit and the work.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

About our bath re-enamelling in Chorleywood

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We are often asked to fix lots of chips and rust spots and a bath that stays dull however much you clean it, across basins & shower trays, Victorian roll-tops and pressed steel baths.

In a smaller place like Chorleywood, homes are often houses and bungalows rather than flats. If the bath is sound, bath re-enamelling saves replacing it.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Chorleywood (WD3)
County
Hertfordshire
Cover
A year, on every repair
Quote
From £350. Fixed, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Chorleywood: what to know about bath re-enamelling

Landlords with property near Chorleywood station (about 0.7 miles west) use us between tenancies, so baths are repaired rather than replaced.

Chorleywood is about 5 miles west of Watford, in Hertfordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Chorleywood is one of 381 towns and villages in Hertfordshire we cover. You can also see our page for London, about 20 miles away.

We cover every part of WD3 for bath re-enamelling and the streets around it. Whether your bath is in a home on South Cottage Drive, South Cottage Gardens and South Park Avenue or a nearby road, we can come to you. Main roads around Chorleywood include the A404, so getting to you is simple. Neighbouring places we cover for bath re-enamelling include Heronsgate (1 mile south-west), Maple Cross (2 miles south), Chenies (2 miles north-west), Horn Hill (2 miles south-west) and West Hyde (3 miles south). Larger places within reach include Watford (5 miles east), Hemel Hempstead (7 miles north), St Albans (10 miles north-east), Harpenden (13 miles north-east), Hatfield (14 miles north-east) and Borehamwood (10 miles east).

Local landmarks in Chorleywood

Our customers here include homes close to St Clement Danes School, Rickmansworth Park and Black Horse Artichoke Dell pub and the streets around them. Chorleywood’s nearest station is Chorleywood station, about 0.7 miles west. A little further out are Harefield Hospital (3.2 miles south) and Chiltern Open Air Museum (2 miles south-west). Green spaces nearby include Chorleywood Common and Tumbling Bay.

Map of Chorleywood © OpenStreetMap contributors

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Why repair rather than replace?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the next day. If your bath in Chorleywood is sound, a repair is typically the better choice.

Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Why choose Surface Doctor in Chorleywood

  • Most jobs done in one visit
  • One price list for the whole UK
  • Work done at your home or business
  • Dust sheets down, tidy finish

Take a look at our Full price list Or Resurfacing vs replacement cost guide.

Landlord and trade work in Chorleywood

For anyone letting property in or around Chorleywood, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Signs you need bath re-enamelling in Chorleywood

The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

Send us a picture if you notice any of these:

  • Wear marks under the taps
  • Enamel that’s lost its shine and feels rough
  • Chips and rust in more than one place
  • A roll-top that is seen better days

If you live in one of the older homes near a church such as Christ Church, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.

What to look for in a quote

  • What happens if they find more damage
  • When it can be used again
  • What the guarantee covers, and for how long
  • Who turns up on the day

10 questions to ask before you book

The process

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it. For a home in Chorleywood, we normally park close by and start immediately.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can generally be used the next day.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift
  • Make sure the room can be ventilated

Get a quote

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Send photos for a quote

Related advice

When we would advise against a repair

We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through
  • Problems we can’t see until an old finish comes off

Send us photos and we’ll tell you honestly before you book.

Materials we work on in Chorleywood

  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

What bath re-enamelling costs

Prices start from £350. There are no hourly rates or hidden extras. The price depends on:

  • Access to the area
  • How many items we do on one visit
  • How hard the colour is to match
  • How many areas need work

Our prices are the same across the UK, so there’s no premium for Chorleywood. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from pictures

Phone pictures are fine. Just make sure we can see:

  • The postcode, so we can plan the visit
  • What it’s made of, if you know
  • A wider photo showing the whole bath
  • Something in shot to show the size

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.