Devon · England
Bath re-enamelling & resurfacing in Churchill, Devon
Our repair technicians come to Churchill for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
Bath re-enamelling in Churchill without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include lots of chips and rust spots and a bath that stays dull however much you clean it, in basins & shower trays, cast iron baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Churchill (EX31)
- Region
- Devon
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Churchill
Churchill is about 5 miles north of Barnstaple, in Devon. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Churchill is one of 586 towns and villages in Devon where we work.
Here we cover the EX31 postcode area. Close by, we cover East Down (1 mile north-east), Patchole (2 miles north-east), Shirwell (2 miles south), Shirwell Cross (2 miles south) and Kentisbury (3 miles north-east). Larger places within reach include Barnstaple (5 miles south), Bideford (13 miles south-west), Ilfracombe (6 miles north-west), Braunton (7 miles south-west), Newport (6 miles south) and South Molton (12 miles south-east).
Around Churchill
Locally, our jobs take us to homes close to Pyne Arms and Church of St John the Baptist, among other places. A little further out are Bratton Fleming Mound (3.6 miles south-east) and North Devon District Hospital (4.3 miles south-west).
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
For landlords and businesses
We work for landlords, letting agents and housing providers in Churchill as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For anyone letting property in or around Churchill, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Repair or replace in Churchill?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why Churchill clients choose us
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
FAQs for Churchill
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Churchill.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
How do I book?
Use the quote form or ring 0345 017 0787.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
What happens next?
You will get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Places near Churchill
What else we do in Churchill
How it works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes most of the day in most cases. The room is left tidy.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Have a window or extractor fan available
Get a quote
Email us pictures of the damage and one of the entire item, and tell us you are in Churchill, and we will come back with a fixed quote.
Advice
What affects the price in Churchill
Prices start from £350. We charge the same across the UK, including Churchill. The price reflects:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How easy the damage is to reach
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Your postcode, so we can check dates
- Any details about the material
- Details of any past repairs
- A close-up of the damage, in focus
To get a price, send two or three photos using our quote form or ring us. We will say right away if a repair is the right fix.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Common problems we fix in Churchill
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed:
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- Wear marks under the taps
Comparing quotes
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- Who will actually do the work
- Is the price fixed, and does it include VAT?
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Have chips seen to early
- Do not leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
