Ceredigion · Wales
Bath re-enamelling & resurfacing in Cribyn, Ceredigion
Local bath re-enamelling for Cribyn: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
Bath re-enamelling in Cribyn without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a bath that stays dull however much you clean it and staining under the taps and around the waste, across acrylic baths, basins & shower trays and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in Cribyn and across Ceredigion.
- Area
- Cribyn (SA48)
- County
- Ceredigion
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Honest limits
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Cribyn customers choose us
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
- We leave the room as we found it
See our full price list and guide to resurfacing and replacement costs.
FAQs for Cribyn
How long does re-enamelling take?
Normally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Cribyn. What changes the price is:
- The material
- Doing more than one item at once
- What kind of damage it is
- How easy the damage is to reach
Our prices are the same across the UK, so there is no premium for Cribyn. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
Two or three clear photos are generally enough. Try to include:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Towns and villages near Cribyn
More services for Cribyn
How the visit works
We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
When to call us in Cribyn
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Keep an eye out for any of the following:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- Stains that will not shift
- A bath in a colour that no longer suits
What to look for in a quote
- What happens if the damage is worse than the pictures show
- What preparation is included
- When it can be used again
- Who turns up on the day
Where we work around Cribyn
Cribyn is about 20 miles north of Carmarthen, in Ceredigion. Anywhere in SA48, we carry out the work at your property. We work in all 125 towns and villages in Ceredigion, from the larger towns to small villages.
Our visits in SA48 work the same way as everywhere else we cover. Close by, we cover Llanwnnen (2 miles south), Cwrtnewydd (3 miles south-west), Silian (3 miles east), Felinfach (3 miles north) and Pentre-bâch (3 miles south-east). Larger places within reach include Aberaeron (8 miles north-west), Lampeter (4 miles south-east), New Quay (10 miles north-west) and Llandysul (9 miles south-west).
Near you in Cribyn
Typical jobs here are in homes near Cribyn school. A little further out are Caer Fach (0.6 miles north-east) and Welsh Quilt Centre (3.7 miles south-east). Green spaces nearby include Gaer Maesmynach and Gorsgoch Lake.
Work for landlords and builders
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
