Ceredigion · Wales
Bath Re-enamelling in Croes-lan
Bath re-enamelling for Croes-lan, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that do not clean off
Bath re-enamelling in Croes-lan, done in place
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a peeling or bubbling previous coating and an original cast iron bath that needs restoring, we can generally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Croes-lan (SA44)
- Area hub
- Ceredigion
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Croes-lan. The price depends on:
- What the surface is made of
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How hard the colour is to match
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- Something in shot to show the size
- Details of any past repairs
- Natural light rather than flash
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Nearby places to Croes-lan
More services for Croes-lan
What we’re called out for in Croes-lan
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- A roll-top that is seen better days
- An old resurfacing that’s failing
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Before you book anyone
- How the room is protected while they work
- How soon you can use it again
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
Your questions about bath re-enamelling in Croes-lan
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What areas do you cover?
The whole UK, including all of Ceredigion. Send your postcode with your pictures and we’ll offer you dates.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
- Respect the curing time we give you
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Croes-lan
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Colour-matched on site
- No need to remove anything
Take a look at our full price list or guide to resurfacing and replacement costs.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a full day from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Open a window if you can
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
How to get a price
Email us pictures of the damage and one of the entire item, with your SA44 postcode, and we’ll reply with a fixed price.
Related advice
Where we work around Croes-lan
Croes-lan is about 15 miles north of Carmarthen, in Ceredigion. Across the SA44 area, a technician comes to you. Croes-lan is one of 125 places in Ceredigion we cover.
We cover every part of SA44. Nearby, we also work in Horeb (1 mile south-east), Penrhiw-llan (2 miles south-west), Aber-banc (2 miles south-west), Glyncaled (2 miles south-west) and Henllan (3 miles south-west). Larger places within reach include Aberteifi (13 miles west), Aberaeron (12 miles north), Lampeter (12 miles east), Bridgend (13 miles west), New Quay (10 miles north) and Llandudoch (14 miles west).
Around Croes-lan
Nearby you’ll also find West Wales Museum of Childhood (2.9 miles south) and Orllwyn Teifi (1.1 miles south-west). Open spaces near Croes-lan include Mount Gernos.
About our accreditations · Every repair comes with a one-year guarantee.
