Derbyshire · England
Bath Re-enamelling in Dalebank
Our repair technicians come to Dalebank for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
What we are called out for in Dalebank
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
- Wear marks under the taps
What to look for in a quote
- How long it needs to cure
- Who turns up on the day
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
Bath re-enamelling in Dalebank without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. Whether it’s an outdated colour you’d like to change and an old resurfacing that’s failing, we can help, whatever the material.
Every repair is covered by our one-year guarantee, wherever you are in Derbyshire.
- Area
- Dalebank (S45)
- Area hub
- Derbyshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
What you get with us
- Rooms protected and left tidy
- Honest advice, even when it means no job
- One price list for the whole UK
- One-year guarantee on every repair
See our full price list or guide to resurfacing and replacement costs.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- Respect the curing time we give you
- Have chips seen to early
- Wash away dyes and oils after use
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we’re done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Ask for a price
Upload photos of the damage and one of the entire item, with your S45 postcode, and we’ll come back with a fixed quote.
Read more
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Dalebank and the surrounding area
Dalebank is about 6 miles south of Chesterfield, in Derbyshire. Clients in Dalebank get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Our technicians cover 532 places across Derbyshire. We work right across the region, from Dalebank to Manchester (about 38 miles away).
All of S45 is covered. We also cover the places around Dalebank: Dicklant (1 mile north-west), Milltown (1 mile south-west), Fallgate (1 mile north-west), Woolley Moor (1 mile east) and Littlemoor (1 mile north). Further out, we also cover Chesterfield (6 miles north), Ilkeston (14 miles south-east), Belper (9 miles south), Heanor (10 miles south-east), Dronfield (10 miles north) and Ripley (8 miles south).
Landmarks near Dalebank
Our clients here include homes close to Stretton Handley Church of England Primary School, The Miners Arms Public House and St Marks and the streets around them. Dalebank’s nearest station is Matlock station, roughly 4.1 miles west of the centre. Nearby you’ll also find Willersley Castle (4.8 miles south-west) and Clay Cross Urban District (2.2 miles east).
Dalebank: your questions answered
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Do you work in Dalebank?
Yes. We work across the UK and come to Dalebank. Send pictures and we will quote, or call 0345 017 0787.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
What affects the price in Dalebank
Prices start from £350. There’s no charge for travel to Dalebank. The price comes down to:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The type of damage
- Where the damage is and how we get to it
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
How to get a fixed price
You can take the pictures on your phone. Ensure they show:
- Daylight if possible, and no flash reflection
- One picture of the whole bath
- Your postcode, so we can check dates
- Details of any past repairs
To get a price, send a couple of photos through our quote form or call us. We will say straight away whether it can be repaired.
Towns and villages near Dalebank
Other services in Dalebank
About our accreditations · Every repair comes with a one-year guarantee.
