Scottish Borders · Scotland
Bath re-enamelling & resurfacing in Denholm, Scottish Borders
Bath re-enamelling across Denholm and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
Bath re-enamelling in Denholm, done in place
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. If you are dealing with a roll-top that’s seen better days and enamel that’s lost its shine and feels rough, we can normally put it right, on Victorian roll-tops, basins & shower trays and acrylic baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Denholm (TD9)
- Area hub
- Scottish Borders
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Denholm
Landlords, letting agents and housing providers in Denholm use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Denholm
What else we do in Denholm
When a repair isn’t the answer
A repair is not right for every job, including:
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Our work in Denholm
Denholm is about 5 miles north-east of Hawick, in the Scottish Borders. Across the TD9 area, a technician comes to you. We cover all 89 towns and villages across the Scottish Borders, from the larger towns to small villages. You can also see our page for Edinburgh, about 39 miles away.
Our visits in TD9 work the same way as everywhere else we cover. From Main Street, Douglas Drive and Murray Place or anywhere nearby, a technician can come to you. Neighbouring places we cover include Burnfoot (4 miles south-west), Belses (4 miles north), Bonchester Bridge (4 miles south), Stirches (5 miles west) and Hawick (5 miles south-west). Further out, we also cover Galashiels (12 miles north-west), Kelso (14 miles north-east), Selkirk (9 miles north-west), Jedburgh (5 miles east), Wilton (5 miles south-west) and Melrose (10 miles north).
Landmarks near Denholm
Around Denholm, we work in homes near Craigmount School and Minto Parish Church, among other places. Other landmarks nearby include Bedrule Castle (1.8 miles east) and Hawick Community Hospital (5 miles south-west). Green spaces nearby include Rubers Law.
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and usually a day. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why Denholm customers choose us
- We leave the room as we found it
- One-year guarantee on every repair
- Nothing taken out or refitted
- Repair technicians who travel to you, UK-wide
Take a look at our full price list or bath cost comparison.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- The material and finish
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- The type of damage
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from pictures
Phone photos are fine, there is no need for anything special. Make sure they show:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Any details about the material
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Do you need bath re-enamelling in Denholm?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
- If travel is included in the price
- What protection goes down before work starts
Questions from Denholm
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
How to look after the repair
It’s all simple stuff:
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear the area around the damage
- Let us know about parking or access
- Let us know if it has been repaired before
Getting a price
To get a price, send a couple of pictures using our quote form or ring us. We will say right away whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
