Swindon · England
Bath Re-enamelling for Draycot Foliat homes
Full bath re-enamelling and resurfacing at your home in Draycot Foliat, with a one-year guarantee on every repair.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
Bath re-enamelling in Draycot Foliat, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Typical jobs include a dull, rough surface that won’t come clean and a roll-top that’s seen better days, on pressed steel baths, acrylic baths and Victorian roll-tops.
Every repair is covered by our one-year guarantee.
- Location
- Draycot Foliat (SN4)
- Area hub
- Swindon
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Draycot Foliat. What changes the price is:
- The size and number of damaged areas
- How easy the damage is to reach
- The material and finish
- The type of damage
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Details of any past repairs
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- A picture taken from further back
To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Nearby places to Draycot Foliat
What else we do in Draycot Foliat
Draycot Foliat questions
How much does bath re-enamelling cost in Draycot Foliat?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Do you cover Draycot Foliat?
Yes. We cover the whole UK and come to Draycot Foliat. Send us pictures for a fixed quote, or call 0345 017 0787.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Aftercare tips
It’s all simple stuff:
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Do not let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Get a quote
For a price in Draycot Foliat, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Covering Draycot Foliat
Draycot Foliat is about 5 miles south-east of Swindon, in Swindon. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Draycot Foliat is one of 68 towns and villages in Swindon we cover. Our jobs stretch from Draycot Foliat to Birmingham (67 miles away).
Every address in SN4 is covered, from the main roads to the quietest streets. Close by, we cover Ridgeway View (1 mile north-east), Chiseldon (1 mile north), Badbury (2 miles north), Medbourne (2 miles north-east) and Badbury Wick (2 miles north). Within a short drive, we also cover Swindon (5 miles north-west), Stratton St Margaret (6 miles north), Royal Wootton Bassett (8 miles north-west), Haydon Wick (7 miles north-west), Priory Vale (7 miles north-west) and Freshbrook (6 miles north-west).
Landmarks near Draycot Foliat
Well-known places in the area include Great Western Hospital (3.5 miles north) and Ogbourne St Andrew (3.6 miles south). Green spaces nearby include Charlbury Hill.
Honest limits
Before booking, it’s worth knowing the limits too:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Signs you need bath re-enamelling in Draycot Foliat
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
The things clients usually mention when they call are:
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
- Stains that won’t shift
- Thin, worn enamel in places
Questions to ask before booking
- Whether a trained technician does the job
- What preparation is included
- How soon you can use it again
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
