Lincolnshire · England
Bath Re-enamelling in Dunsby
Full bath re-enamelling and resurfacing in Dunsby, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
About our bath re-enamelling in Dunsby
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include an original cast iron bath that needs restoring and wear marks under the taps, in basins & shower trays, cast iron baths and pressed steel baths.
You get a one-year guarantee, the same in Dunsby as everywhere else we work.
- Area
- Dunsby (PE10)
- Region
- Lincolnshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Dunsby
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Are there extra charges for Dunsby?
There’s no separate call-out charge. The fixed price covers the visit and the work.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How do I get a price for bath re-enamelling in Dunsby?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your PE10 postcode.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Prices start from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Honest advice, even when it means no job
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
Take a look at our prices page or bath cost comparison.
Where we work around Dunsby
Dunsby is about 5 miles north of Bourne, in Lincolnshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Dunsby is one of 732 places in Lincolnshire where we work. We work right across the region, from Dunsby to Birmingham (69 miles away).
Our visits in PE10 work the same way as everywhere else we cover. Jobs here include addresses on Main Road and Dunsby Drove and the roads around them. Neighbouring places we cover include Rippingale (1 mile north-west), Haconby (1 mile south), Dowsby (2 miles north), Morton (2 miles south) and Hanthorpe (2 miles south-west). Larger places within reach include Grantham (13 miles north-west), Spalding (9 miles east), Stamford (13 miles south-west), Sleaford (12 miles north), Bourne (5 miles south) and Austerby (5 miles south).
Local landmarks in Dunsby
Typical jobs here are in homes near Church of All Saints. A little further out are Aslackby Castle (2.6 miles north-west).
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. It normally takes a full day.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Getting a price
Most clients in Dunsby get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- The material
- How much damage there is
- The colour and finish to match
- The type of damage
Our prices are the same across the UK, with no extra for Dunsby. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One picture of the whole bath
- Whether it’s been repaired or coated before
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
More services for Dunsby
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we’re called out for in Dunsby
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
Send us a photo if you notice any of these:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
Comparing quotes
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- How your room will be protected
About our accreditations · Every repair comes with a one-year guarantee.
