Northamptonshire · England
Bath re-enamelling & resurfacing in Eastcote, Northamptonshire
Bath re-enamelling for Eastcote, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
About our bath re-enamelling in Eastcote
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for a dull, rough surface that won’t come clean and a coating lifting around the plughole, on basins & shower trays, pressed steel baths and cast iron baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Eastcote (NN12)
- Area hub
- Northamptonshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- What kind of damage it is
- Where the damage is and how we get to it
- What the surface is made of
- The colour and finish to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- A photo taken from further back
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Also near Eastcote
Also in Eastcote
Common questions in Eastcote
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you cover Eastcote?
We do. Technicians travel to Eastcote from across the region, with no extra charge for travel.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Which areas do you work in?
The entire UK, including all of Northamptonshire. Send your postcode with your photos and we will offer you dates.
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Colour-matched on site
- Fixed prices from your photos
Take a look at our full price list or resurfacing vs replacement cost guide.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a full day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Related advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Signs you need bath re-enamelling in Eastcote
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
What your quote should include
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- What the guarantee covers, and for how long
About Eastcote
Eastcote is about 4 miles north of Towcester, in Northamptonshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 364 towns and villages in Northamptonshire. We work right across the region, from Eastcote to Birmingham (about 42 miles away).
We cover every part of the NN12 postcode area. From Greenway, Birds Hill Road and Gayton Road or a nearby road, we can come to you. If you are just outside Eastcote, we cover Astcote (1 mile south-west), Pattishall (1 mile west), Cold Higham (1 mile west), Grimscote (2 miles west) and Greens Norton (3 miles south). Larger places within reach include Northampton (7 miles north-east), Wellingborough (15 miles north-east), Daventry (9 miles north-west), Brackley (12 miles south-west), Towcester (4 miles south) and Wolverton (11 miles south-east).
Around Eastcote
Our clients here include homes close to Church of Holy Cross, Pattishall Church of England Primary School and Tiffield Pocket Park, among other places. Other local landmarks include Campion School (2.3 miles north) and Eastcote Arms Public House (within half a mile west). A little further out are Farthingstone Castle Dykes (4.2 miles north-west). The countryside around Eastcote includes Bugbrooke Meadows.
Keeping it looking good
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
