St Helens · England
Bath Re-enamelling for Eccleston Park homes
We travel to Eccleston Park for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough

Bath re-enamelling in Eccleston Park without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We’re often asked to fix staining under the taps and around the waste and a bath that stays dull however much you clean it, across cast iron baths, acrylic baths and basins & shower trays.
You get a one-year guarantee, the same in Eccleston Park as everywhere else we work.

- Area
- Eccleston Park (L34, L35, WA10)
- County
- St Helens
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. Allow a full day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Getting a price
If you’re in Eccleston Park and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Do you need bath re-enamelling in Eccleston Park?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Several chips and rust patches
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Comparing quotes
- A fixed quote, and whether VAT is included
- How long it needs to cure
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
Questions from Eccleston Park
Do you cover the entire of St Helens?
All of St Helens, and the rest of the UK. There is no extra charge for travel.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Eccleston Park.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
Also near Eccleston Park
Other services in Eccleston Park
Landlords, agents and businesses in Eccleston Park
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Eccleston Park and the surrounding area
Eccleston Park is about 1 mile north of Prescot, in St Helens. Wherever you are in the L34 postcode area, we carry out the work at your property. Our repair technicians cover all 32 towns and villages across St Helens, from the larger towns to small villages. Our jobs stretch from Eccleston Park to Liverpool (about 6 miles away).
Here we cover the L34, L35 and WA10 postcode area. Whether you live on Old Lane, New Road and Ford Road or anywhere nearby, we can come to you. We also travel to Prescot (1 mile south), Gillar's Green (1 mile north), Whiston (1 mile south-west), West Park (1 mile north-east) and Rainhill (1 mile south-east). Larger places within reach include Newton-le-Willows (6 miles east), Haydock (5 miles north-east), Earlestown (6 miles east), Parr (3 miles north-east), Sutton (3 miles east) and Moss Bank (4 miles north-east).
Landmarks near Eccleston Park
Around Eccleston Park, we work in homes near St James, Eccleston Lane Ends Primary School and Carmel College and the streets around them. You’ll also find Thatto Heath Park (1.2 miles north-east), Our Lady Help of Christians Church (under half a mile north-east), Eagle and Child pub (0.6 miles south-west) and Prescot School (1.1 miles west). There’s a railway station in Eccleston Park itself: Eccleston Park station. Further afield, we also cover the area around Pilkington Glass Museum (2.2 miles north-east) and Whiston Hospital (0.7 miles south).
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we work on in Eccleston Park
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Eccleston Park. The price depends on:
- How easy the damage is to reach
- How much damage there is
- Doing more than one item at once
- Unusual colours or finishes
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Details of any past repairs
- The postcode, so we can plan the visit
- What it’s made of, if you know
Send us photos of the damage and one of the entire item, with your L34 postcode, and we will come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.

