Bury · England
Bath re-enamelling & resurfacing in Elton, Bury
Fixed-price bath re-enamelling in Elton and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- An outdated colour you’d like to change
What a repair cannot fix
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- A metal bath with a through crack
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our bath re-enamelling in Elton
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Our technicians work on pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are wear marks under the taps and a coloured bath you want in white.
Whatever the size of the job, it’s backed by a one-year guarantee in Elton and across Bury.
- Location
- Elton (BL8, BL9, BL0)
- Area hub
- Bury
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Elton
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams in Bury and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Keeping it looking good
So the finish stays in good condition:
- Rinse off hair dye, oils and bath bombs right away
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
- Dry the bath after use to stop limescale
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Elton and the surrounding area
Elton is about 1 mile west of Bury, in Bury. Jobs in Elton are booked in like any other job: a fixed quote from photos, then a visit to do the work. Elton is one of 40 towns and villages in Bury we cover. Our jobs stretch from Elton to Manchester (9 miles away).
We work across the BL8, BL9 and BL0 postcode area. From Ivy Road, Haig Road and Leigh Lane or anywhere nearby, we can come to you. Main roads around Elton include the A56, which makes travel easy. We also travel to Bolholt (1 mile west), Bury (1 mile east), Redvales (1 mile south-east), Ainsworth (2 miles west) and Radcliffe (2 miles south). We also work in nearby towns such as Prestwich (5 miles south), Whitefield (3 miles south), Ramsbottom (3 miles north), Besses o' th' Barn (4 miles south-east), Unsworth (3 miles south-east) and Stoneclough (4 miles south-west). Elton is among the bigger towns we cover in Bury.
Landmarks near Elton
Our customers here include homes close to Guardian Angels Roman Catholic Primary School, Old White Lion pub and Burrs Country Park and the streets around them. You will also find St Stephen (under half a mile south) and St Gabriel's Roman Catholic High School (less than half a mile south-east). Elton’s nearest station is Hall i' th' Wood station, about 4 miles west of the centre. Other landmarks nearby include Bury General Hospital (1.5 miles north-east) and The Fusilier Museum (0.7 miles east). The countryside around Elton includes Nob End.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Your questions about bath re-enamelling in Elton
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Do you cover the whole of Bury?
Everywhere in the UK, Elton included. Travel is included in the price.
Do you cover Elton?
We do. We send a technician to Elton for every job, and the price is the same as everywhere else.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
More services for Elton
Common problems we fix in Elton
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a picture:
- Wear marks under the taps
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
Comparing quotes
- Who turns up on the day
- What preparation is included
- What happens if they find more damage
- When it can be used again
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day. Prices start from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Everything repaired in place
- Generally one visit, start to finish
- Colour-matched on site
- Every repair guaranteed for a year
See our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
