County Durham · England
Bath Re-enamelling in Elwick
Full bath re-enamelling and resurfacing in Elwick, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Bath re-enamelling in Elwick, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair acrylic baths, cast iron baths and pressed steel baths, and the jobs we see most are chips and rust in more than one place and stains that won’t shift.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Elwick (TS27)
- County
- County Durham
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Elwick
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why Elwick customers choose us
- A year’s guarantee on all work
- Honest advice, even when it means no job
- No extra charge for your area
- Dust sheets down, tidy finish
Take a look at our full price list and resurfacing vs replacement cost guide.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Landlords, agents and businesses in Elwick
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Keeping it looking good
It’s all simple stuff:
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Our work in Elwick
Elwick is about 3 miles west of Hartlepool, in County Durham. From the centre of Elwick to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Elwick is one of 329 places in County Durham where we work. We work right across the region, from Elwick to Newcastle upon Tyne (25 miles away).
All of TS27 is covered. You’ll find streets such as The Paddock, Greenlea and The Walk, all of which we cover. Other places close to Elwick include Dalton Piercy (1 mile south-east), West Park (2 miles east), High Throston (3 miles east), Hartlepool (3 miles east) and Rift House (3 miles south-east). Within a short drive, we also cover Durham (13 miles north-west), Newton Aycliffe (12 miles west), Spennymoor (12 miles west), Seaham (11 miles north), Peterlee (5 miles north) and Shildon (14 miles west).
Local landmarks in Elwick
Typical jobs here are in homes near St Peter's Elwick Church of England Primary School, Church of St. Peter and High Tunstall College of Science and the streets around them. Elwick’s nearest station is Hartlepool station, about 3.6 miles east. Well-known places in the area include Middleton Grange Shopping Centre (3.3 miles east) and Gray Art Gallery & Museum (3.4 miles east).
- Parks and local facilities nearby include Throston Rural (2 miles east)
Signs you need bath re-enamelling in Elwick
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- A roll-top that is seen better days
Questions to ask before booking
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
Towns and villages near Elwick
Also in Elwick
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Have a window or extractor fan available
- Make sure the area is dry
- Keep pets and children out of the room while we work
Getting a price
Email us a photo of the damage and one of the entire item, with your TS27 postcode, and we’ll reply with a fixed price.
Advice
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
