Slough · England
Bath Re-enamelling in Farnham Common
Bath re-enamelling in Farnham Common without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Staining under the taps and around the waste
Bath re-enamelling in Farnham Common, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on pressed steel baths, cast iron baths and acrylic baths, and people most often call us about wear marks under the taps and a period or roll-top bath worth keeping.
All our work comes with our one-year guarantee.
- Where
- Farnham Common (SL2)
- County
- Slough
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Covering Farnham Common
Farnham Common is about 3 miles north of Slough, in Slough. Anywhere in SL2, a technician comes to you. Farnham Common is one of 31 towns and villages in Slough we cover. You can also see our page for London, about 23 miles away.
Jobs in SL2 are booked in the same way as anywhere else. That includes homes on Temple Way, Common Wood and Badgers Wood. Close by, we cover Egypt (1 mile north-west), East Burnham (1 mile south-west), Hedgerley (1 mile north-east), Farnham Royal (1 mile south) and Littleworth Corner (2 miles west). We also work in nearby towns such as Slough (3 miles south), Cippenham (3 miles south), Chalvey (4 miles south), Langley (4 miles south-east), Upton (4 miles south) and Burnham (3 miles south-west).
Around Farnham Common
Our customers here include homes close to Caldicott School, St John the Evangelist and Khalsa Secondary Academy, among other places. Other local landmarks include Cocksherd Wood (2 miles south-west), The Royal Oak pub (less than half a mile north-west) and Farnham Common Junior School (less than half a mile north). The nearest railway station is Burnham station, roughly 2.9 miles south-west. Well-known places in the area include Wexham Park Hospital (2.4 miles south-east). Not far away are Burnham Beeches and Taplow Lake.
What we can’t put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- CHAS and Constructionline accredited
- One price list for the entire UK
- Every repair guaranteed for a year
- Straight answers about what a repair can do
See our full price list or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Questions from Farnham Common
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Are there extra charges for Farnham Common?
No. Our quotes include travel, and we charge the same wherever you are.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
How do I book?
Use the quote form or ring 0345 017 0787.
How to care for the repair
Once the work has cured, treat it gently:
- Wash away dyes and oils after use
- Have chips seen to early
- Keep suction mats out of the bath
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Places near Farnham Common
Other services in Farnham Common
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- What the surface is made of
- What kind of damage it is
- Access to the area
- Whether we combine several jobs
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
Getting a price from photos
Two or three clear photos are typically enough. Try to include:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A photo taken from further back
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Landlord and trade work in Farnham Common
If you manage property in Farnham Common, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
The process
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
- Tell us about parking, stairs or access
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
