Surrey · England
Bath re-enamelling & resurfacing in Farnham, Surrey
Bath re-enamelling in Farnham without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Several chips and rust patches
Farnham questions
What happens once I’ve sent photos?
We review the photos and send a fixed quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do you cover Farnham?
Yes, we do. We send a technician to Farnham for every job, with no extra charge for travel.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Bath re-enamelling at your home in Farnham
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include enamel that’s lost its shine and feels rough and lots of chips and rust spots, across acrylic baths, pressed steel baths and cast iron baths.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Farnham (GU9, GU10)
- County
- Surrey
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Read more
Keeping it looking good
Nothing complicated is needed:
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Do you need bath re-enamelling in Farnham?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Most people contact us after spotting one of these:
- Staining under the taps and around the waste
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Before you book anyone
- How soon you can use it again
- Whether the price covers travel
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- A bath that is rusted through
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
For anyone letting property in or around Farnham, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- How many items we do on one visit
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed price
You can take the pictures on your phone. Ensure they show:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- One picture of the whole bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Towns and villages near Farnham
Also in Farnham
Farnham and the surrounding area
Farnham is about 6 miles south of Farnborough, in Surrey. Anywhere in GU9, a technician comes to you. Farnham is one of 395 towns and villages in Surrey where we work. You can also see our page for London, about 36 miles away.
Jobs in GU9 and GU10 work the same way as everywhere else we cover. Whether you live on Barncroft, Approach Road and Saxon Croft or a nearby road, we can come to you. You’ll find Farnham on the A31 and A287, so it’s easy for us to reach. If you are just outside Farnham, we cover Compton (1 mile east), Hale (1 mile north), Upper Hale (2 miles north), Runfold (2 miles east) and Heath End (2 miles north). We also work in nearby towns such as Guildford (10 miles east), Woking (12 miles north-east), Camberley (9 miles north), Frimley (8 miles north), Haslemere (9 miles south) and Cranleigh (14 miles east). As one of the bigger places in Surrey, Farnham sees plenty of our work.
What’s near Farnham
In Farnham, that means homes near Moor Park, St Joan of Arc's Church and Weydon School. You’ll also find William Cobbett Public House (less than half a mile north-west), St Polycarp's Catholic Primary School (within half a mile east) and Farnham College (under half a mile south-east). There is a railway station in Farnham itself: Farnham station. Well-known places in the area include Museum of Farnham (less than half a mile north-west) and Farnham Castle (0.6 miles north-west). Green spaces nearby include Farnham Park and Aunt's Pool.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
