Bridgend · Wales
Bath re-enamelling & resurfacing in Fountain, Bridgend
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Fountain. Send photos for a free, fixed quote.
- Resurfacing from £350
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
How we handle bath re-enamelling in Fountain
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a bath in a colour that no longer suits and worn patches where water runs and sits, across Victorian roll-tops, basins & shower trays and pressed steel baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Where
- Fountain (CF32)
- County
- Bridgend
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Honest limits
Some jobs aren’t right for a repair, for example:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Fountain
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
When to call us in Fountain
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
- Chips and rust in more than one place
Before booking anyone
- How long it needs to cure
- What prep work is covered
- Who will actually do the work
- How changes to the job are handled
Landlord and trade work in Fountain
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Towns and villages near Fountain
Other services in Fountain
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- Colour mixed on the day to match
- Free fixed quotes from pictures
Read our prices page and bath cost comparison.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Fountain. The price reflects:
- What kind of damage it is
- Where the damage is and how we get to it
- Unusual colours or finishes
- How much damage there is
We charge the same wherever you are, so there is no premium for Fountain. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- Details of any past repairs
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Do not let dyes or oils sit on the finish
- Avoid suction-cup mats
- Respect the curing time we give you
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Tell us if there are stairs or a lift
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Common questions in Fountain
Do you work in Fountain?
Yes. We work across the UK and come to Fountain. Send photos and we’ll quote, or call 0345 017 0787.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
What areas do you cover?
All of Bridgend, and the rest of the UK. There is no extra charge for travel.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Fountain and the surrounding area
Fountain is about 3 miles north-west of Bridgend, in Bridgend. From the centre of Fountain to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Fountain is one of 91 towns and villages in Bridgend we cover.
Here we cover the CF32 postcode area. Close by, we cover Ffordd-y-Gyfraith (1 mile north-west), Cefn Cross (1 mile south-west), Coytrahen (1 mile north), Cefn Cribwr (2 miles west) and Bryntirion (2 miles south). Within a short drive, we also cover Bridgend (3 miles south-east), Maesteg (5 miles north), Porthcawl (5 miles south-west), Newcastle Higher (3 miles south-east), Pencoed (5 miles east) and Coity Higher (3 miles south-east).
Local landmarks in Fountain
In Fountain, that means homes near Tondu Primary School, Coleg Cymunedol Y Dderwen and St Robert of Newminster Church. Also close by are Ynysawdre Comprehensive School (1.3 miles north-east), Colliers Arms (0.7 miles east) and Bryngarw Country Park (1.8 miles north-east). Fountain’s nearest station is Tondu station, roughly 1 mile north-east. Other landmarks nearby include Designer Outlet Bridgend (1.6 miles east) and Glanrhyd Hospital (1.4 miles south-east). The countryside around Fountain includes Tycribwr Hill and Cornelly Quarry Lake 2.
About our accreditations · Every repair comes with a one-year guarantee.
