Na h-Eileanan Siar · Scotland
Bath Re-enamelling for Geirinis homes
Full bath re-enamelling and resurfacing for homes and businesses in Geirinis and across Na h-Eileanan Siar. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
About our bath re-enamelling in Geirinis
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. We work on Victorian roll-tops, acrylic baths and basins & shower trays, and common reasons people get in touch are enamel that’s lost its shine and feels rough and staining under the taps and around the waste.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Geirinis (HS8)
- Region
- Na h-Eileanan Siar
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Repairing versus replacing in Geirinis
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- Everything repaired in place
- A year’s guarantee on all work
See our prices page or resurfacing vs replacement cost guide.
What we are called out for in Geirinis
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
You may need us if you’ve spotted any of these:
- An outdated colour you’d like to change
- A roll-top that is seen better days
- Chips and rust in more than one place
- Thin, worn enamel in places
Comparing quotes
- What happens if the damage is worse than the pictures show
- How your room will be protected
- If travel is included in the price
- How long it needs to cure
Geirinis: your questions answered
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
How do I get a price for bath re-enamelling in Geirinis?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What areas do you cover?
We cover the whole UK, including Geirinis and the rest of Na h-Eileanan Siar. Just include your postcode and we will confirm dates.
Nearby places to Geirinis
What else we do in Geirinis
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How to care for the repair
After the repair has cured, a few habits help it last:
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Do not leave a chip unrepaired
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price depends on:
- How much damage there is
- The colour and finish to match
- Access to the area
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Make sure the area is dry
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Get a quote
Most clients in Geirinis get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Where we work around Geirinis
Geirinis (Gaelic: Gerinish) is in Na h-Eileanan Siar. From the centre of Geirinis to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 87 places in Na h-Eileanan Siar.
Postcode districts we cover here: HS8. From Cille Bha'nain and Dun Mor or anywhere nearby, a technician can come to you. Neighbouring places we cover include Creag Ghoraidh (4 miles north), Grimsay (5 miles north-east), Balivanich (8 miles north), Baile a' Mhanaich (8 miles north) and Dalabrog (13 miles south). If you’re somewhere remote, ring us first and we’ll plan the trip.
What’s near Geirinis
For a walk, there is Loch Bee and Ben Tarbert.
About our accreditations · Every repair comes with a one-year guarantee.
