Dumfries and Galloway · Scotland
Bath Re-enamelling in Gelston
Bath re-enamelling for Gelston, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A coloured bath you want in white
Bath re-enamelling in Gelston without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are a peeling or bubbling previous coating and a coloured bath you want in white.
Whatever the size of the job, you get the same one-year guarantee in Gelston and across Dumfries and Galloway.
- Where
- Gelston (DG7)
- County
- Dumfries and Galloway
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Looking after the surface is easy:
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
Take a look at our pricing or resurfacing vs replacement cost guide.
Common problems we fix in Gelston
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Get in touch if you’ve noticed:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Several chips and rust patches
- Brown or grey marks that do not clean off
Comparing quotes
- Who will actually do the work
- How changes to the job are handled
- How to care for the finish
- What protection goes down before work starts
Covering Gelston
Gelston is about 17 miles south-west of Dumfries, in Dumfries and Galloway. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 138 places across Dumfries and Galloway, from the larger towns to small villages. Our nearest city page is Glasgow, about 67 miles away.
Jobs in DG7 work the same way as everywhere else we cover. You’ll find streets such as Douglas Terrace and Douglas Crescent. Other places close to Gelston include Kelton Hill (2 miles west), Castle Douglas (2 miles north), Bridge of Dee (2 miles west), Palnackie (3 miles east) and Dalbeattie (4 miles north-east).
Local landmarks in Gelston
Typical jobs here are in homes near Kirkland Of Gelston and the streets around them. Well-known places in the area include Gelston Castle (0.5 miles east) and Castle Douglas Art Gallery (2.4 miles north). Open spaces near Gelston include Carlingwark Loch.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- How easy the damage is to reach
- How much damage there is
- Doing more than one item at once
- Any earlier repairs that need removing first
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day, and we’ll tell you if anything changes.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Open a window if you can
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When a repair isn’t the answer
We will not take on work that will not last, so these are the limits:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Gelston: your questions answered
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Do you come to Gelston?
Yes. We work across the UK and come to Gelston and the rest of Dumfries and Galloway. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Places near Gelston
Other services in Gelston
About our accreditations · Every repair comes with a one-year guarantee.
