Hampshire · England
Bath Re-enamelling for Gilbert Street homes
Bath re-enamelling for Gilbert Street, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- Worn patches where water runs and sits
Bath re-enamelling in Gilbert Street, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s a bath in a colour that no longer suits and enamel that’s lost its shine and feels rough, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Gilbert Street (SO24)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Don’t leave a chip unrepaired
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Gilbert Street as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
When to call us in Gilbert Street
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Most people get in touch when they notice one of these:
- Stains that won’t shift
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Before booking anyone
- What aftercare is recommended
- If travel is included in the price
- Whether cleaning and preparation are in the price
- When it can be used again
The process
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
- Let the surface dry out before the visit
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Advice
Gilbert Street and nearby
Gilbert Street is about 6 miles south-west of Alton, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Gilbert Street is one of 683 places in Hampshire where we work. We work right across the region, from Gilbert Street to London (about 51 miles away).
Postcode districts we cover here: SO24. Whether you live on Andrew's Lane, Gilbert Street and Swelling Hill or a nearby road, we can come to you. Other places close to Gilbert Street include Ropley (1 mile south-west), Kitwood (1 mile north-east), North Street (1 mile north-west), Charlwood (1 mile south-east) and Ropley Dean (1 mile west). Within a short drive, we also cover Basingstoke (12 miles north), Winchester (11 miles west), Eastleigh (15 miles south-west), Horndean (13 miles south), Alton (6 miles north-east) and Waterlooville (14 miles south).
Near you in Gilbert Street
Typical jobs here are in homes near Ropley Church of England Primary School and Church of St Peter, among other places. Further afield, we also cover the area around Barton Castle (4.1 miles north-west) and Alton Community Hospital (4.8 miles north-east). Open spaces near Gilbert Street include Shutts Copse and Red Hill.
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Gilbert Street. What changes the price is:
- Previous DIY repairs that have to come out
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
Before you send photos, these tips help us give you a firm price:
- Details of any past repairs
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- One picture of the whole bath
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
FAQs for Gilbert Street
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Gilbert Street.
Also near Gilbert Street
Other services in Gilbert Street
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
When we’d advise against a repair
Before booking, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we work on in Gilbert Street
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
