Leeds · England
Bath Re-enamelling in Halton Moor
Bath re-enamelling in and around Halton Moor: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Bath re-enamelling in Halton Moor, done in place
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s a peeling or bubbling previous coating and brown or grey marks that don’t clean off, we can help, on cast iron baths, basins & shower trays and acrylic baths alike.
All our work is covered by our one-year guarantee.
- Where
- Halton Moor (LS15, LS9, LS14)
- Area hub
- Leeds
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a full day from start to finish. Before we go, we will explain when it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Related advice
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Our work in Halton Moor
Halton Moor is about 3 miles north of Rothwell, in Leeds. Clients in Halton Moor get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover all 198 towns and villages in Leeds.
Jobs in LS15, LS9 and LS14 work the same way as everywhere else we cover. From Oak Road, Grove Road and Moor Avenue or anywhere nearby, a technician can come to you. If you’re just outside Halton Moor, we cover Colton (2 miles east), Austhorpe (2 miles east), Brown Moor (2 miles east), Hollinthorpe (3 miles east) and Swillington Common (3 miles east). We also work in nearby towns such as Leeds (3 miles north-west), Morley (6 miles south-west), Pudsey (8 miles west), Beeston (3 miles west), Farsley (8 miles west) and Horsforth (7 miles north-west).
Near you in Halton Moor
We visit homes around Meadowfield Primary School, St Wilfrid's Church and The Halton Moor pub, among other places. Nearby too are Temple Newsam Park (1.2 miles south-east) and Corpus Christi Catholic College (under half a mile north). The closest station to Halton Moor is Cross Gates station, about 1.6 miles north-east of the centre. A little further out are Rothwell Castle (2.9 miles south) and Seacroft Hospital (1 mile north-east). For a walk, there’s Lemonroyd Lake and St Aidan's.
Your questions about bath re-enamelling in Halton Moor
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
How do I get a price for bath re-enamelling in Halton Moor?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your LS15 postcode.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Looking after it afterwards
So the finish stays in good condition:
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Nearby places to Halton Moor
Also in Halton Moor
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. The price reflects the work involved, not where you live. You’ll see the full price before booking.
Why Halton Moor customers choose us
- Rooms protected and left tidy
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
Take a look at our pricing and guide to resurfacing and replacement costs.
What affects the price in Halton Moor
Resurfacing from £350. There’s no charge for travel to Halton Moor. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Whether we combine several jobs
- Access to the area
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- Something in shot to show the size
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
