Hampshire · England
Bath re-enamelling & resurfacing in Hamble-le-Rice, Hampshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Hamble-le-Rice. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Wear marks under the taps
- A coloured bath you want in white
Bath re-enamelling at your home in Hamble-le-Rice
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Common call-outs are for wear marks under the taps and a bath that stays dull however much you clean it, in cast iron baths, basins & shower trays and pressed steel baths.
Every job is backed for twelve months in Hamble-le-Rice and everywhere else. If something goes wrong with the work, we come back.
- Area
- Hamble-le-Rice (SO31)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
About Hamble-le-Rice
Hamble-le-Rice is about 3 miles east of Hythe, in Hampshire. Whether you are in the middle of Hamble-le-Rice or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Hamble-le-Rice is one of 683 towns and villages in Hampshire we cover. Our nearest city page is London, about 69 miles away.
Postcode districts we cover here: SO31. Whether you live on High Street, College Close and Deanfield Close or a nearby road, we can come to you. You’ll find Hamble-le-Rice on the B3397, which makes it straightforward to reach. We also cover the places around Hamble-le-Rice: Hound (1 mile north-west), Butlocks Heath (1 mile north-west), Netley (2 miles north-west), Bursledon (2 miles north) and Old Netley (2 miles north). Larger places within reach include Winchester (14 miles north), Gosport (8 miles south-east), Havant (15 miles east), Eastleigh (7 miles north), Fareham (6 miles east) and Horndean (14 miles east).
What’s near Hamble-le-Rice
In Hamble-le-Rice, that means homes near Hamble Primary School, Hamble Common and Ye Old White Harte Public House. Nearby too are Church of St Andrew (less than half a mile south-east) and The Hamble School (0.9 miles north). Hamble-le-Rice’s nearest station is Hamble station, roughly 0.8 miles north of the centre. A little further out are Coldeast (1.9 miles east) and St Andrew's Castle (0.6 miles south-east). For a walk, there’s Mercury Marshes.
Repairing versus replacing in Hamble-le-Rice
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why choose Surface Doctor in Hamble-le-Rice
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- No extra charge for your area
- Every repair guaranteed for a year
Take a look at our full price list or resurfacing vs replacement cost guide.
FAQs for Hamble-le-Rice
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
What we can’t put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- A bath that is rusted through
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Towns and villages near Hamble-le-Rice
What else we do in Hamble-le-Rice
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Landlord and trade work in Hamble-le-Rice
If you manage property in Hamble-le-Rice, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Do you need bath re-enamelling in Hamble-le-Rice?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Send us a picture if you notice any of these:
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- Stains that won’t shift
Before you book anyone
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- How to look after the finish
- Who turns up on the day
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
