Hampshire · England

Bath re-enamelling & resurfacing in Hart Plain, Hampshire

Full bath re-enamelling and resurfacing in Hart Plain, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Hart Plain

Can I fix it myself?

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

About our bath re-enamelling in Hart Plain

We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. Whether it’s enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping, we can help.

All our work is covered by a one-year guarantee, wherever you are in Hampshire.

Stained basin resurfaced to clean white (before and after)
Where
Hart Plain (PO8, PO7)
County
Hampshire
Warranty
A year, on every repair
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

Hart Plain and nearby

Hart Plain is about 1 mile north of Waterlooville, in Hampshire. From the centre of Hart Plain to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Hart Plain to London (about 58 miles away).

Every address in PO8 and PO7 is covered, from the main roads to the quietest streets. Streets in the area include Milton Road, King's Road and Eagle Avenue, and we cover them all. Other places close to Hart Plain include Cowplain (1 mile north-east), Waterlooville (1 mile south), Soake (1 mile west), Furzeley Corner (2 miles west) and Purbrook (2 miles south). Larger places within reach include Gosport (8 miles south-west), Havant (3 miles south-east), Eastleigh (15 miles west), Fareham (8 miles south-west), Hedge End (12 miles west) and Petersfield (9 miles north-east).

What’s near Hart Plain

Typical jobs here are in homes near Hart Plain Infant School, The Hart Plain Church and The Cowplain School. The nearest railway station is Rowlands Castle station, about 3.1 miles east. Other landmarks nearby include Havant Museum (3.9 miles south-east) and Clanfield Earthwork (4.1 miles north-east). Green spaces nearby include Southmoor Nature Reserve and Windmill Hill.

Map of Hart Plain © OpenStreetMap contributors

Should you replace it?

Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why us?

  • Same prices wherever you are
  • Colour-matched on site
  • Honest advice, even when it means no job
  • CHAS and Constructionline accredited

Read our pricing or bath cost comparison.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

When to call us in Hart Plain

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

The most common problems we’re called about are:

  • Chips and rust in more than one place
  • A roll-top that is seen better days
  • Worn patches where water runs and sits
  • An outdated colour you’d like to change

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • The length of the guarantee and what it covers
  • Is the price fixed, and does it include VAT?
  • How soon you can use it again

Our hiring checklist

When we’d advise against a repair

In fairness, there are a few things a repair won’t fix:

  • Plumbing leaks, which need a plumber
  • Acrylic that moves when you stand in it
  • Anything hidden under an old coating, until we remove it

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths

Common questions in Hart Plain

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

Which areas do you work in?

Across the UK. Our prices are the same everywhere.

How long does re-enamelling take?

Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

What does bath re-enamelling cost?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

What happens next?

You’ll get a fixed quote back, plus dates. You are under no obligation.

Can I get a quote without a visit?

Generally, yes. Clear pictures let us give you a fixed quote without visiting.

Is there a smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Repair dripping taps early
  • Avoid suction-cup mats
  • Wipe the bath dry after use in hard water areas
  • Get any chip repaired quickly

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.

For landlords and businesses

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

The process

Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated
  • Ensure the area is dry

Getting a price

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.