Dorset · England

Bath Re-enamelling in Hartgrove

Bath re-enamelling for Hartgrove, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Hartgrove

Bath re-enamelling at your home in Hartgrove

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. If you are dealing with lots of chips and rust spots and enamel that’s lost its shine and feels rough, we can help.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Hartgrove (SP7)
Region
Dorset
Guarantee
One year on every repair
Quote
From £350. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

Your questions about bath re-enamelling in Hartgrove

Can you quote from photos?

Nearly always. If photos don’t show enough, we will ask for another angle.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

How do I book?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

What happens after I send photos?

We review the photos and send a fixed quote with dates.

How long is the bath unusable?

Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.

Do you need to take the bath out?

Not at all. Everything is done in your bathroom, with the room masked and ventilated.

Can you re-enamel a roll-top bath?

Yes, often. We resurface the inside, and the outside can be refinished too.

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

Signs you need bath re-enamelling in Hartgrove

Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Look out for any of the following:

  • Enamel that is lost its shine and feels rough
  • A roll-top that is seen better days
  • Brown or grey marks that don’t clean off
  • A coloured bath you want in white

What your quote should include

  • Aftercare advice
  • Whether the price is fixed and includes VAT
  • If travel is included in the price
  • What happens if they find more damage

How to compare quotes

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

Covering Hartgrove

Hartgrove is about 8 miles north-west of Blandford Forum, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 462 towns and villages across Dorset.

All of SP7 is covered, from the main roads to the quietest streets. That includes homes on Church Lane and Bleax Close. Neighbouring places we cover include East Orchard (1 mile south-west), Guy's Marsh (1 mile north), Stour Row (2 miles north-west), Moorside (3 miles west) and Todber (3 miles west). We also work in nearby towns such as Blandford Forum (8 miles south-east), Gillingham (5 miles north), Shaftesbury (3 miles north-east), Sherborne (13 miles west), Peacemarsh (6 miles north) and Sturminster Newton (4 miles south-west).

Near you in Hartgrove

Typical jobs here are in homes near Church of St Thomas. Nearby you’ll also find Westminster Memorial Hospital (3.1 miles north-east) and Gold Hill Museum (3.2 miles north-east). For a walk, there is Melbury Hill and Girdlers Coppice.

Map of Hartgrove © OpenStreetMap contributors

What bath re-enamelling costs

Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:

  • Access to the area
  • How many items we do on one visit
  • What kind of damage it is
  • Whether old repairs or coatings need taking off

The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

How to get a fixed price

You can take the pictures on your phone. Just make sure we can see:

  • Details of any past repairs
  • A photo taken from further back
  • Natural light rather than flash
  • A close-up of the damage, in focus

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

The process

Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. Allow the best part of a day.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s normally ready the following day.

Before we arrive

  • Let us know about parking or access
  • Clear the area around the damage
  • Keep children and pets away from the room on the day

Get a quote

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.

Send pictures for a quote

Related advice

When a repair is not the answer

We won’t take on work that will not last, so these are the limits:

  • Plumbing leaks, which need a plumber
  • Acrylic that moves when you stand in it
  • Holes rusted through the metal

Send us pictures and we will tell you honestly.

What we work on

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

Should you replace it?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Why book with us

  • Free fixed quotes from pictures
  • CHAS, Constructionline and SafeContractor accredited
  • Normally one visit, start to finish
  • One price list for the entire UK

Take a look at our full price list or bath cost comparison.

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

For anyone letting property in or around Hartgrove, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.