Wakefield · England
Bath re-enamelling & resurfacing in Havercroft, Wakefield
Full bath re-enamelling and resurfacing at your home in Havercroft, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An old resurfacing that is failing
For landlords and businesses
If you manage property in Havercroft, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Landlords, letting agents and housing providers in Havercroft use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Bath re-enamelling in Havercroft without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are several chips and rust patches and a bath that stays dull however much you clean it.
Every job is backed for twelve months in Havercroft and everywhere else. We return to put right any problem with the work.
- Where
- Havercroft (WF4)
- Region
- Wakefield
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
A repair is not right for every job, including:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Our work in Havercroft
Havercroft is about 5 miles north-west of South Elmsall, in Wakefield. Across the WF4 area, we come to you. Havercroft is one of 101 towns and villages in Wakefield we cover. You can also see our page for Leeds, about 14 miles away.
Our technicians cover all of WF4 and the streets around it. That includes homes on Park Walk, Church View Close and Cow Lane. Nearby, we also work in Ryhill (1 mile west), Wintersett (1 mile north-west), Felkirk (1 mile south), Cold Hiendley (1 mile west) and Crofton (2 miles north). Within a short drive, we also cover Wakefield (6 miles north-west), Castleford (7 miles north), Pontefract (6 miles north-east), Ossett (8 miles north-west), Normanton (5 miles north) and South Kirkby and Moorthorpe (5 miles south-east).
Local landmarks in Havercroft
Around Havercroft, we work in homes near St James, Outwood Primary Academy Newstead Green and Outwood Academy Hemsworth. The closest station to Havercroft is Fitzwilliam station, roughly 1.4 miles north-east. A little further out are West Riding Pauper Lunatic Asylum (5.7 miles north-west) and Sandal Castle (4.2 miles north-west). The countryside around Havercroft includes Waterton Park.
Also near Havercroft
Also in Havercroft
Repairing versus replacing in Havercroft
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Dust sheets down, tidy finish
- No extra charge for your area
- Every repair guaranteed for a year
- Work done at your home or business
See our pricing or bath cost comparison.
What affects the price in Havercroft
Prices start from £350. There’s no charge for travel to Havercroft. The price depends on:
- How many items we do on one visit
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A close-up of the damage, in focus
- The material, if you know it
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Most clients in Havercroft get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Aftercare tips
Most damage we see is avoidable. A few tips:
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Do not leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Common questions in Havercroft
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Let us know if it has been repaired before
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
Ask for a price
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
