Dorset · England
Bath Re-enamelling in Haythorne
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Haythorne. Send photos for a free, fixed quote.
- Resurfacing from £350
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Bath re-enamelling in Haythorne without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are a peeling or bubbling previous coating and brown or grey marks that don’t clean off.
You get a one-year guarantee, the same in Haythorne as everywhere else we work.
- Location
- Haythorne (BH21)
- Area hub
- Dorset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Honest limits
We will not take on work that will not last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Haythorne
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
What affects the price in Haythorne
Prices start from £350. We do not charge extra for travel to Haythorne. The price depends on:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- The material
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
About Haythorne
Haythorne is about 3 miles west of Verwood, in Dorset. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Haythorne is one of 462 places in Dorset where we work.
We work across BH21. That includes homes on Horton Road and Haythorne. Close by, we cover Horton (1 mile south-west), Chalbury Common (1 mile south-west), Woodlands (1 mile north-east), Knob's Crook (1 mile south-east) and Holt Wood (1 mile south). Further out, we also cover Christchurch (12 miles south-east), Wimborne Minster (5 miles south), Blandford Forum (9 miles west), Verwood (3 miles east), Shaftesbury (14 miles north-west) and Ferndown (5 miles south-east).
What’s near Haythorne
We visit homes around Church of St Wolfrida. Nearby you will also find Cranborne Castle Hill (3.2 miles north-east) and St Leonard's Hospital (5.4 miles south-east).
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It generally takes the best part of a day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the following day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Have a window or extractor fan available
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Signs you need bath re-enamelling in Haythorne
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Keep an eye out for these signs:
- An outdated colour you’d like to change
- A roll-top that is seen better days
- Several chips and rust patches
- A coating lifting around the plughole
What to look for in a quote
- Aftercare advice
- What prep work is covered
- How long the guarantee is and what it covers
- How changes to the job are handled
FAQs for Haythorne
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Do you come to Haythorne?
We do. Repair technicians travel to Haythorne from across the region, with no extra charge for travel.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How do I get a price for bath re-enamelling in Haythorne?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Towns and villages near Haythorne
Other services in Haythorne
Repair or replace in Haythorne?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Haythorne. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Haythorne
- Fixed prices from your photos
- Rooms protected and left tidy
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
