Derbyshire · England
Bath re-enamelling & resurfacing in Hilton, Derbyshire
Bath re-enamelling in and around Hilton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in Hilton
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you are dealing with brown or grey marks that don’t clean off and a bath in a colour that no longer suits, we can help, whatever the material.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Hilton (DE65)
- Region
- Derbyshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Do you need bath re-enamelling in Hilton?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed any of these:
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Before you book anyone
- Whether cleaning and preparation are in the price
- How the colour is matched
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
Keeping it looking good
Nothing complicated is needed:
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
When we’d advise against a repair
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
Send us photos and we will tell you honestly.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
FAQs for Hilton
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a photo of the whole item with your DE65 postcode.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Derbyshire.
Which areas do you work in?
All of Derbyshire, and the rest of the UK. There is no extra charge for travel.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Covering Hilton
Hilton is about 4 miles north of Burton upon Trent, in Derbyshire. We visit homes and businesses in Hilton and nearby villages, so you do not need to take anything anywhere. We work in 532 places across Derbyshire, from the larger towns to small villages. We work right across the region, from Hilton to Birmingham (about 30 miles away).
All of DE65 is covered, from the main roads to the quietest streets. Whether you live on Main Street, Marston Brook and Calder Close or a nearby road, a technician can come to you. Other places close to Hilton include Burntheath (1 mile north), Marston on Dove (1 mile west), Egginton (2 miles south-east), Rolleston on Dove (2 miles south-west) and Hatton Fields (2 miles north-west). Larger places within reach include Swadlincote (7 miles south-east), Ilkeston (15 miles north-east), Long Eaton (15 miles east), Belper (13 miles north-east), Heanor (15 miles north-east) and Ripley (15 miles north-east).
What’s near Hilton
Locally, our jobs take us to homes close to St Mary's Church, The de Ferrers Academy and Hilton Primary School, among other places. The closest station to Hilton is Tutbury & Hatton station, roughly 2.2 miles west. Further afield, we also cover the area around Etwall Hospital (1.6 miles north-east) and Tutbury Museum (2.5 miles west).
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to the best part of a day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why book with us
- We leave the room as we found it
- Everything repaired in place
- Work done at your home or business
- Colour mixed on the day to match
Take a look at our full price list or resurfacing vs replacement cost guide.
For landlords and businesses
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
If you manage property in Hilton, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Previous DIY repairs that have to come out
- The type of damage
- How easy the damage is to reach
- The colour and finish to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- A close-up of the damage, in focus
- The material, if you know it
- Details of any past repairs
- Something in shot to show the size
Email us a picture of the damage and one of the entire item, and tell us you are in Hilton, and we’ll reply with a fixed price.
Also near Hilton
Other services in Hilton
About our accreditations · Every repair comes with a one-year guarantee.
