Norfolk · England
Bath Re-enamelling for Holme next the Sea homes
Bath re-enamelling for Holme next the Sea, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A roll-top that is seen better days
- Brown or grey marks that do not clean off
Covering Holme next the Sea
Holme next the Sea is about 15 miles north of King's Lynn, in Norfolk. We visit homes and businesses in Holme next the Sea and nearby villages, so nothing has to leave your home. We cover 797 places across Norfolk, from the larger towns to small villages.
Our visits in PE36 are booked in the same way as anywhere else. Streets in the area include Aslack Way, Main Road and Peddars Way, and we cover them all. We also cover the places around Holme next the Sea: Old Hunstanton (1 mile west), Ringstead (2 miles south), Thornham (2 miles east), Hunstanton (2 miles south-west) and Titchwell (4 miles east). We also work in nearby towns such as King's Lynn (15 miles south), Fairstead (15 miles south), West Lynn (15 miles south-west), North Lynn (14 miles south), Wells-next-the-Sea (13 miles east) and Dersingham (8 miles south).
Near you in Holme next the Sea
Locally, our jobs take us to homes close to White Horse Public House, Alderman Peel High School and Holme Dunes. Green spaces nearby include Holme Bird Observatory.
How we handle bath re-enamelling in Holme next the Sea
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and the jobs we see most are stains that won’t shift and a bath that stays dull however much you clean it.
All of our repairs are guaranteed for twelve months in Holme next the Sea and everywhere else. If something goes wrong with the work, we come back.
- Where
- Holme next the Sea (PE36)
- Area hub
- Norfolk
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Questions from Holme next the Sea
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Towns and villages near Holme next the Sea
Also in Holme next the Sea
Do you need bath re-enamelling in Holme next the Sea?
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Keep an eye out for any of the following:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Wear marks under the taps
Questions to ask before you book
- What happens if they find more damage
- What protection goes down before work starts
- How the colour is matched
- Aftercare advice
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Repairing versus replacing in Holme next the Sea
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Nothing taken out or refitted
- No extra charge for your area
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
Take a look at our full price list or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Holme next the Sea
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Rinse off hair dye, oils and bath bombs right away
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
