Worcestershire · England
Bath re-enamelling & resurfacing in Hopwood, Worcestershire
Bath re-enamelling in and around Hopwood: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
Do you need bath re-enamelling in Hopwood?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted any of these:
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
- A roll-top that is seen better days
- An outdated colour you’d like to change
Questions to ask before you book
- How your room will be protected
- How soon you can use it again
- How to care for the finish
- Whether the price is fixed and includes VAT
Bath re-enamelling in Hopwood without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the day after. Our repair technicians work on pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are brown or grey marks that don’t clean off and thin, worn enamel in places.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Hopwood (B48)
- County
- Worcestershire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Why repair rather than replace?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
What you get with us
- Repair technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
See our prices page or bath cost comparison.
The process
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Hopwood questions
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Places near Hopwood
Also in Hopwood
Hopwood and nearby
Hopwood is about 5 miles north-east of Bromsgrove, in Worcestershire. Whether you’re in the middle of Hopwood or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 376 towns and villages across Worcestershire, from the larger towns to small villages. Our jobs stretch from Hopwood to Birmingham (7 miles away).
All of B48 is within our area. We regularly work on streets such as Canal Side, Bittell Farm Road and Redditch Road. Neighbouring places we cover include Lea End (1 mile east), Cofton Hackett (1 mile west), Alvechurch (1 mile south), Red Hill (1 mile north-east) and Kendal End (2 miles west). Within a short drive, we also cover Redditch (5 miles south), Kidderminster (12 miles west), Bromsgrove (5 miles south-west), Droitwich Spa (11 miles south-west), Stourport-on-Severn (14 miles west) and Bewdley (15 miles west).
Around Hopwood
Locally, our jobs take us to homes close to Cofton Park, Crown Meadow First School & Nursery and Church of St Michael, among other places. For rail, the closest station is Barnt Green station, about 1.6 miles south-west. Other landmarks nearby include West Heath Hospital (1.8 miles north) and The Patrick Motor Museum (3.3 miles north-east). Not far away are Bilberry Hill.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Doing more than one item at once
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Something in shot to show the size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
To get a price, send a couple of pictures using our quote form or call us. We will tell you honestly whether it can be repaired.
Landlords, agents and businesses in Hopwood
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
