Devon · England
Bath re-enamelling & resurfacing in Humber, Devon
Bath re-enamelling in Humber without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coating lifting around the plughole
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Let us know about parking or access
Get a quote
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Bath re-enamelling in Humber, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s staining under the taps and around the waste and a coating lifting around the plughole, we can typically put it right, on Victorian roll-tops, cast iron baths and acrylic baths alike.
Big or small, it’s backed by a one-year guarantee in Humber and across Devon.
- Location
- Humber (TQ14)
- Region
- Devon
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Honest limits
In fairness, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Humber
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Your questions about bath re-enamelling in Humber
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Can I get a quote without a visit?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover the whole of Devon?
All of Devon, and the rest of the UK. Travel is included in the price.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Towns and villages near Humber
Other services in Humber
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How many areas need work
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Where the damage is and how we get to it
We charge the same wherever you are, so there is no premium for Humber. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Any details about the material
- Where you are, by postcode
- Natural light rather than flash
- One picture of the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
Signs you need bath re-enamelling in Humber
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
Most people contact us when they notice something like this:
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Questions to ask before booking
- What aftercare is recommended
- Whether the price covers travel
- How long it needs to cure
- A fixed quote, and whether VAT is included
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Humber and nearby
Humber is about 2 miles north-east of Kingsteignton, in Devon. From the centre of Humber to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Humber is one of 586 places in Devon where we work.
Our visits in TQ14 are booked in the same way as anywhere else. Nearby, we also work in Luton (1 mile north), Ideford (1 mile north), Bishopsteignton (1 mile south-east), Ashwell (1 mile south) and Olchard (2 miles north-west). We also work in nearby towns such as Exeter (11 miles north), Exmouth (8 miles north-east), Newton Abbot (4 miles south-west), Teignmouth (3 miles south-east), Dawlish (4 miles east) and St Thomas (10 miles north).
What’s near Humber
In Humber, that means homes near Teign School and The Elizabethan Inn, among other places. The nearest railway station is Teignmouth station, roughly 3 miles south-east. Other landmarks nearby include Newton Abbot Community Hospital (3.3 miles south-west) and Bishopsteignton Heritage (1.3 miles south-east). Green spaces nearby include Labrador Bay RSPB Reserve and Haldon Hill.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
