Angus · Scotland

Bath Re-enamelling for Inverkeilor homes

Local bath re-enamelling for Inverkeilor: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Inverkeilor

What bath re-enamelling costs

Prices start from £350. There’s no area surcharge for Inverkeilor. The price reflects:

  • How many areas need work
  • What the surface is made of
  • Access to the area
  • What kind of damage it is

Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

How to get a fixed quote

Phone photos are fine, there’s no need for anything special. Ensure they show:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • A picture taken from further back

Upload photos of the damage and one of the whole item, and tell us you’re in Inverkeilor, and we’ll reply with a fixed quote.

How we handle bath re-enamelling in Inverkeilor

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a dull, rough surface that won’t come clean and several chips and rust patches, we can generally put it right.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Stained basin resurfaced to clean white (before and after)
Where
Inverkeilor (DD11)
County
Angus
Warranty
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Anything hidden under an old coating, until we remove it
  • Steel that has corroded right through
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths

Repair or replace: which is better?

Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • We leave the room as we found it
  • Colour-matched on site
  • No extra charge for your area
  • Normally one visit, start to finish

See our prices page or resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Inverkeilor: your questions answered

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Can I get a quote without a visit?

Normally, yes. Clear pictures let us give you a fixed quote without visiting.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Is repairing better than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote.

How do I get a price for bath re-enamelling in Inverkeilor?

Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Landlord and trade work in Inverkeilor

We carry out planned and one-off repairs for housing associations and facilities teams in Angus and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

What we do, step by step

The work is clean and fairly quiet. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to look after it.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day
  • Point us to the nearest place to park

Getting a price

If you’re in Inverkeilor and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Read more

Signs you need bath re-enamelling in Inverkeilor

Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.

If you can see any of these, send us a photo:

  • A peeling or bubbling previous coating
  • Brown or grey marks that don’t clean off
  • A bath in a colour that no longer suits
  • Enamel that is lost its shine and feels rough

What to look for in a quote

  • How long it needs to cure
  • Whether they match the colour on site
  • How to care for the finish
  • Who turns up on the day

How to compare quotes

Aftercare tips

After the repair has cured, a few habits help it last:

  • Wipe the bath dry after use in hard water areas
  • Respect the curing time we give you
  • Never use suction bath mats
  • Have chips seen to early

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Inverkeilor and the surrounding area

Inverkeilor is about 5 miles north of Arbroath, in Angus. We visit clients in Inverkeilor, so nothing has to leave your home. Our repair technicians cover all 40 towns and villages across Angus. Our nearest city page is Edinburgh, about 54 miles away.

All of DD11 is within our area. We regularly work on streets such as Station Road, Main Road and Myreside Drive. Nearby, we also work in Auchmithie (3 miles south), St Vigeans (4 miles south), Friockheim (4 miles west), Colliston (5 miles south-west) and Kirkton of Craig (5 miles north-east). Larger places within reach include Forfar (13 miles west), Carnoustie (11 miles south-west), Brechin (8 miles north-west), Hunter's Town (12 miles south-west), Gardynebourg (12 miles south-west) and West Haven (11 miles south-west).

Landmarks near Inverkeilor

Around Inverkeilor, we work in homes near Inverkeilor Parish Church. Further afield, we also cover the area around Arbroath Infirmary (5.8 miles south) and Red Castle (1.8 miles north-east).

Map of Inverkeilor © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.