Northamptonshire · England
Bath Re-enamelling in Irchester
Our technicians come to Irchester for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Landlords, agents and businesses in Irchester
We work for landlords, letting agents and housing providers in Irchester as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Bath re-enamelling in Irchester, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include thin, worn enamel in places and a coloured bath you want in white, across Victorian roll-tops, acrylic baths and cast iron baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Irchester (NN29)
- Region
- Northamptonshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Irchester
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- We leave the room as we found it
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
Read our prices page or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Irchester
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Most people contact us when they notice something like this:
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
- A roll-top that is seen better days
- Lots of chips and rust spots
What to look for in a quote
- Who will actually do the work
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- How the room is protected while they work
Your questions about bath re-enamelling in Irchester
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Nearby places to Irchester
Other services in Irchester
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
Getting ready for the visit
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say straight away if a repair is the right fix.
Related advice
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How many areas need work
- Access to the area
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
You can take the photos on your phone. Make sure they show:
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Any earlier repairs or coatings
- The material, if you know it
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Covering Irchester
Irchester is about 2 miles west of Rushden, in Northamptonshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover 364 places across Northamptonshire, from the larger towns to small villages. We work right across the region, from Irchester to Birmingham (54 miles away).
Jobs in NN29 are booked in the same way as anywhere else. From Station Road, High Street and London End or a nearby road, we can come to you. Irchester sits on or near the B569, so getting to you is simple. We also travel to Farndish (1 mile south), Little Irchester (2 miles west), Little Wymington (2 miles east), Wymington (2 miles south-east) and Podington (2 miles south-east). Further out, we also cover Northampton (11 miles west), Corby (15 miles north), Kettering (9 miles north), Wellingborough (3 miles north-west), Desborough (14 miles north-west) and Raunds (6 miles north-east).
Around Irchester
Our customers here include homes close to Church of St Katherine, Rushden Hall and Wollaston School and the streets around them. Irchester’s nearest station is Wellingborough station, roughly 2.1 miles north-west. Further afield, we also cover the area around Wollaston Museum (under half a mile south-east) and Rushden Lakes (1.7 miles north-east). Open spaces near Irchester include Swanspool Lake and Ditchford Lakes and Meadows.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
